Welcome to the Loopmasters

Welcome to the Loopmasters

DRUMgrain

This Combinator patch contains a Redrum player in which the separate 10 outputs from each channel are taking to a separate 14/2 mixer channel whereby you can then apply an 12412p1513m y of the four effects via the Aux sends plus of course EQ, Pan, Level

Guide to using DRUMgrain

The DRUMgrain can be activated either by pressing play on your sequencer or by hitting the Run Pattern Devices on combi patch.

The Redrum player has been loaded ready with sounds and patterns but don't let it stop you putting in your own sounds or creating new patterns

ROTORY 1 = FILTER Will change the frequency of the ECF-42 Filter and will apply to the whole drum kit

ROTORY 2 = ROOM SIZE This will alter Size setting on the RV-7 reverb unit

ROTORY 3 = Grain Amnt This will alter the "rate" of Mod B on Malstrom Use when Button 3 highlighted red

ROTORY 4 = ECHO STEPS Will change the delay steps on the RV700

BUTTON 1 = BASS KILL Will switch the filter from Low Pass to Band Pass type filter and remove Low frequencies as long as Rotory 1 is turned fully to the Right

BUTTON 2 = REVERB ON This button will mix Reverb to any channel on mixer that has had the AUX 2 knob applied

BUTTON 3 = GRANULATE This button will mix Granular effect to any channel on mixer that has had the AUX 4 knob applied

BUTTON 4 = ECHO ON This button will mix Delay to any channel on mixer that has had the AUX 1 knob applied

PHASER = Simply turn up AUX 3 on the mixer channel you require to affect

Have fun and remember to checkout our website for Quality Pro samples Patches and more online at www.loopmasters.com.