EVOLIUMT Radio Solutions
Alcatel GSM 900 / GSM 1800
Catalogue of BSS Counters
CONTENTS
References
Scope
Introduction
BSS Counters
BSS Traffic Measurements (Measurement Type 1)
Resource Availability Measurements (Measurement Type 2)
Resource Usage on CCCH-Channel Measurements (Measurement Type 3)
Resource Usage on SDCCH-Channel Measurements (Measurement Type 4)
Resource Usage on TCH-Channel Measurements (Measurement Type 5)
TCH Handover 16116n133q Measurements (Measurement Type 6)
LapD Measurements (Measurement Type 7)
X25 Measurements (Measurement Type 8)
N7 Measurements (Measurement Type 9)
A-Interface Measurements (Measurement Type 18)
Short-Message-Service Point-to-Point (SMS-PP) Measurements (Measurement Type 19)
SCCP Measurements (Measurement Type 25)
TCH Outgoing Handover 16116n133q per Adjacency Measurements (Measurement Type 26)
TCH Incoming Handover 16116n133q per Adjacency Measurements (Measurement Type 27)
SDCCH Handover 16116n133q Measurements (Measurement Type 28)
Directed Retry Measurements (Measurement Type 29)
Short-Message-Service Cell-Broadcast (SMS-CB) Measurements (Measurement Type 30)
Overview Measurements (Measurement Type 110)
Traffic flow measurements (Measurement Type 180)
Observation Measurements
SDCCH Observations (Measurement Type 10)
TCH Measurements Observations (Measurement Type 11)
Internal Handover 16116n133q Observations (Measurement Type 12)
Incoming External Handover 16116n133q Observations (Measurement Type 13)
Outgoing External Handover 16116n133q Observations (Measurement Type 14)
TCH Observations (Measurement Type 15)
Appendix: BSS Counters sorted by Counter ID
"GSM 900/GSM 1800 BSS Feature List", 3DC 21080 0002 TQZZA
"GSM 900/GSM1800 BSS - Feature Description", 3DC 21081 0005 TQZZA
"Catalogue of GPRS Counters"; 3DC 21089 0009 TQZZA
This document provides technical information on the available BSS performance counters provided by the Performance Management application of the Alcatel EVOLIUMTM BSS in Release B6.
For more explanation on the Performance Management application please refer to the BSS Feature Description .
GPRS counters are provided in a separate document , because GPRS is an optional feature.
The following chapters describe the available Performance Management Information provided by the Alcatel GSM 900/GSM 1800/GSM 1900 BSS.
The chapter "BSS Counters" describes the performance measurements performed in the BSC, providing counters grouped in measurement types. Within the measurement types the counters are sorted according to the counter name in alphabetical order. The Appendix provides the counters sorted by their ID within a measurement type.
The chapter "Observation Measurements Observation Measurements" describes
the performance observations performed in the BSC, providing records of system
events grouped in observation types. Within the observation measurement types
the counters are sorted according to the counter
ID.
The descriptions in chapters and provides per counter, indicator or record:
Counter Name: the counter/indicator/record name as provided at the OMC-R to the user. The counter name is defined in a manner that allows to deduce the provided counter purpose from the name. A counter name is unique within the measurement type.
Counter ID:
provides the unique short name identification of the counter/indicator/record.
It is used for easier counters handling of the countersas
possible by counter names.
Domain: Handover 16116n133q , Quality of Service, Resource Availability & Usage, Traffic Load and Adjacency indicates on which measurement domain a counter supplies information. The domains are only relevant for the BSS counters.
Description: both,
the information supplied by the counter/indicator/record is
described and in which operational task the counter can help, is
described.
Measured Object indicates for which object the counter collects the performance data. Possible objects are:
- Cell: (common) cell,
- target or source cell
(handover counters)
- HO adj.: handover adjacency target or source cell
- TRX_TS: TRX-timeslot,
TRX TRX
(all timeslots)or
TRX-timeslot (resource usage
counters)
LapD: LapD-link,
N7
SL: N7-link (transmission
counters),
X.25: X.25 link,
- BSC: BSC (SMS counters).
Type: the counter collection mechanism (cumulative counters (CC), status inspection (SI), discrete event registration (DER)) is indicated. Three types of BSS counters can be distinguished according to the way their value is determined:
- Cumulative Counters (CC):
instances of pre-defined events
are accumulated in counters over time with
The results will be made
available at pre-defined reporting intervals.
- Status Inspection (SI):
groups of items can be periodically inspected to ascertain status (e.g. how many channels in a trunk are simultaneously busy?), with results made available at pre-defined reporting intervals. The sampling period is given in brackets.
- Discrete Event Registration (DER):
pre-defined event occurrences can be recorded in
detail tThe
sampling rate of discrete events being is an
operator controlled attribute.
G1/G2: this
filed indicates if the counter/indicator/record is supported by the G1 or G2
BSC. As G1 BSC is not supporting all BSS features in B6.2, not all counters are
supported by this BSC hardware generation.
BSS counters are either Cummulative or Status Inspection counters. They are grouped in Measurement Types, each dedicated to the data collection and the statistics for a particular system task. Each Measurement Type (and all included counters) can be activated in the frame of a measurement campaign for a set of network elements. The counters are implemented in the BSC.
This measurement type provides a set of counters related to the radio traffic evaluation per telecom procedure.
Measurement Type 1 can be used in On-Demand Measurement-Campaigns. It can be activated per cell.
|
Type |
|
|
|
|
Meas. |
Type |
|
NB_DTAP_MO_NOR_ASS_SUCC |
C161a |
Quality of Service |
Number of mobile originating normal assignment - DTAP successes |
|
CC |
|
|
NB_DTAP_MT_NOR_ASS_SUCC |
C161b |
Quality of Service |
Number of mobile terminating normal assignment - DTAP successes |
|
CC |
|
|
NB_IMM_ASS_ALLOC |
C148 |
Traffic Load |
Number of immediate assignment plus SDCCH normal assignments for which SDCCH channel is allocated by the BSC. |
|
CC |
|
|
NB_IMM_ASS_EXEC_FAIL_RADIO |
C149 |
Quality of Service |
Number of immediate assignment -execution failures due to MS access problem. |
|
CC |
|
|
NB_IMM_ASS_PREP_FAIL_CONG |
C04 |
Quality of Service |
Number of immediate assignment -preparation failures due to congestion. |
|
CC |
|
|
NB_IMM_ASS_SUCC_MO |
C02 |
Quality of Service |
Number of immediate assignment -successes for Mobile Originating procedure. Details are provided by C02a to C02h. |
|
CC |
|
|
NB_IMM_ASS_SUCC_MO_CALL_EST |
C02h |
Quality of Service |
Number of immediate assignment -successes for Mobile Originating procedure, case: normal or emergency call establishment. |
|
CC |
|
|
NB_IMM_ASS_SUCC_MO_CM_REEST |
C02e |
Quality of Service |
Number of immediate assignment -successes for Mobile Originating procedure, case: CM Re-establishment procedure. |
|
CC |
|
|
NB_IMM_ASS_SUCC_MO_FOLLOW_ON |
C02d |
Quality of Service |
Number of immediate assignment -successes for Mobile Originating procedure, case: Location Update request ("follow on" procedure). |
|
CC |
|
|
NB_IMM_ASS_SUCC_MO_IMSI_DETACH |
C02g |
Quality of Service |
Number of
immediate assignment -successes for Mobile |
|
CC |
|
|
NB_IMM_ASS_SUCC_MO_L3INFO_UNKNOW |
C02f |
Quality of Service |
Number of
immediate assignment -successes for Mobile |
|
CC |
|
|
NB_IMM_ASS_SUCC_MO_LOC_UPD |
C02a |
Quality of Service |
Number of immediate assignment -successes for Mobile Originating procedure, case: Location Update request (except the "follow on" procedure). |
|
CC |
|
|
NB_IMM_ASS_SUCC_MO_SMS |
C02b |
Quality of Service |
Number of immediate assignment -successes for Mobile Originating procedure, case: SMS procedure on SDCCH. |
|
CC |
|
|
NB_IMM_ASS_SUCC_MO_SUP_SERV |
C02c |
Quality of Service |
Number of immediate assignment -successes for Mobile Originating procedure, case: Supplementary Service. |
|
CC |
|
|
NB_IMM_ASS_SUCC_MT |
C01 |
Quality of Service |
Number of immediate assignment plus SDCCH normal assignment -successes for Mobile Terminating procedure. |
|
CC |
|
|
NB_INC_EXT_TCH_HO_QUEUED |
C13b |
Traffic Load |
Number of TCH (in HR or FR usage) incoming external handover -request that are put in BSC queue. |
|
CC |
|
|
NB_INC_IDR_ALLOC |
C15a |
Traffic Load |
Number of incoming internal directed retry (towards a TCH channel in HR or FR usage) whose target channel is allocated by the BSC. |
|
CC |
|
|
NB_INC_IDR_SUCC (1) |
C17a |
Quality of Service |
Number of incoming directed retry (towards a TCH channel in HR or FR usage) -successes |
|
CC |
|
|
NB_INC_SDCCH_HO_ALLOC |
C147 |
Traffic Load |
Number of incoming internal or external SDCCH handovers -whose target SDCCH channel is allocated by the BSC. |
|
CC |
|
|
NB_INC_SDCCH_HO_SUCC |
C10 |
Quality of Service |
Number of incoming SDCCH handover (any kind) -successes. |
|
CC |
|
|
NB_INC_TCH_HO_ALLOC |
C15b |
Traffic Load |
Number of incoming TCH (in HR or FR usage) handover (internal or external) whose target channel is allocated by the BSC. The external directed retries are also counted by this counter. |
|
CC |
|
|
NB_INC_TCH_HO_SUCC |
C17b |
Quality of Service |
Number of incoming internal and external TCH (in HR or FR usage) handover -successes. The external directed retries are also counted by this counter. |
|
CC |
|
|
NB_MULTIBAND_MS_ACCESS_EXCEPT_LU |
C150a |
Traffic Load |
Number of initial accesses for call establishments (location update apart) of mobiles able to handle multiband. |
|
CC |
|
|
NB_OUT_SDCCH_HO_SUCC |
C03 |
Quality of Service |
Number of outgoing SDCCH handover (any kind) -successes. |
|
CC |
|
|
NB_OUT_TCH_HO_SUCC |
C20 |
Quality of Service |
Number of outgoing TCH (in HR or FR usage) handover (internal or external) -successes. |
|
CC |
|
|
NB_SDCCH_DROP_EST_PHAS_BSS_PB |
C137 |
Quality of Service |
Number of SDCCH drops in SDCCH established phase due to BSS problem. |
|
CC |
|
|
NB_SDCCH_DROP_EST_PHAS_RLF |
C138 |
Quality of Service |
Number of
SDCCH drops on SDCCH established phase due to radio link failure (radio link
timeout or |
|
CC |
|
|
NB_SDCCH_DROP_OUT_HO |
C07 |
Quality of Service |
Number of SDCCH drops during any outgoing SDCCH handover. |
|
CC |
|
|
NB_TCH_DROP_DTAP_EST_PHAS_BSS_PB |
C162b |
Quality of Service |
Number of TCH (in HR or FR usage) drops in TCH DTAP established phase due to BSS problem. |
|
CC |
|
|
NB_TCH_DROP_DTAP_EST_PHAS_REM_TRANS_FAIL |
C162c |
Quality of Service |
Number of TCH (in HR or FR usage) drops in TCH DTAP established phase due to remote transcoder failure. This counter is not concerned by the channel change procedure. |
|
CC |
|
|
NB_TCH_DROP_DTAP_EST_PHAS_RLF |
C162a |
Quality of Service |
Number of TCH
(in HR or FR usage) drops in TCH DTAP established phase due to radio link
failure (radio link timeout or |
|
CC |
|
|
NB_TCH_DROP_EST_PHAS_BSS_PB |
C14c |
Quality of Service |
Number of TCH (in HR or FR usage) drops in TCH established phase due to BSS problem. |
|
CC |
|
|
NB_TCH_DROP_EST_PHAS_REM_TRANS_FAIL |
C139 |
Quality of Service |
Number of TCH (in HR or FR usage) drops in TCH established phase due to remote transcoder failure. This counter is not concerned by the channel change procedure. |
|
CC |
|
|
NB_TCH_DROP_EST_PHAS_RLF |
C136 |
Quality of Service |
Number of TCH
(in HR or FR usage) drops in TCH established phase due to radio link failure
(radio link timeout or |
|
CC |
|
|
NB_TCH_DROP_HO_PREP_EXEC_FAIL_BSS_PB |
C14a |
Quality of Service |
Number of TCH (in HR or FR usage) drops due to BSS problem during any TCH handover preparation and execution phases. |
|
CC |
|
|
NB_TCH_DROP_OUT_HO_EXEC |
C21 |
Quality of Service |
Number of TCH drops during the execution of any TCH outgoing handover. |
|
CC |
|
|
NB_TCH_NOR_ASS_ALLOC |
C16 |
Traffic Load |
Number of TCH (in HR or FR usage) normal assignment -whose TCH channel is allocated in the BSC. |
|
CC |
|
|
NB_TCH_NOR_ASS_EXEC_FAIL_RADIO |
C146b |
Quality of Service |
Number of TCH (in HR or FR usage) normal assignment -execution failures due to MS access problem. |
|
CC |
|
|
NB_TCH_NOR_ASS_HO_EST_PHAS_FAIL_BSS_PB |
C14 |
Quality of Service |
Number of TCH failures due to BSS problem. Details are provided by C14a/b/c. |
|
CC |
|
|
NB_TCH_NOR_ASS_PREP_EXEC_FAIL_BSS_PB |
C14b |
Quality of Service |
Number of TCH (in HR or FR usage) drops during normal assignment preparation and execution phases due to BSS problem. |
|
CC |
|
|
NB_TCH_NOR_ASS_PREP_FAIL_CONG |
C612 |
Quality of Service |
Number of TCH (in HR or FR usage) normal assignment -preparation failures due to congestion. Details are given by counters C612a/b/c/d. |
|
CC |
|
|
NB_TCH_NOR_ASS_PREP_FAIL_NO_QUEUE |
C612a |
Quality of Service |
Number of TCH (in HR or FR usage) normal assignment -preparation failures due to congestion because queuing is not permitted. |
|
CC |
|
|
NB_TCH_NOR_ASS_PREP_FAIL_QUEUE_FULL |
C612b |
Quality of Service |
Number of TCH (in HR or FR usage) normal assignment -preparation failures due to congestion because the queue is full and there are no request of lowest priority to dequeue. |
|
CC |
|
|
NB_TCH_NOR_ASS_PREP_FAIL_QUEUE_REJ |
C612d |
Quality of Service |
Number of TCH (in HR or FR usage) normal assignment -preparation failures due to congestion because the request is in a first time queued, but then rejected because dequeued by a higher priority request. |
|
CC |
|
|
NB_TCH_NOR_ASS_PREP_FAIL_T11_EXP |
C612c |
Quality of Service |
Number of TCH (in HR or FR usage) normal assignment -preparation failures due to congestion because the request is in a first time queued, but then rejected because no free TCH can be found before timer expiry. |
|
CC |
|
|
NB_TCH_NOR_ASS_QUEUED |
C13a |
Traffic Load |
Number of TCH (in HR or FR usage) normal assignment -requests that are put in BSC queue. |
|
CC |
|
|
NB_TCH_NOR_ASS_SUCC |
C18 |
Quality of Service |
Number of TCH (in HR or FR usage) normal assignment -successes. |
|
CC |
|
|
NB_TIMES_TRAF_DETECTED_HIGH |
C442 |
Resource Availability & Usage |
Number of times the traffic_load is "high". This counter permits to tune the following parameters: A_TRAFFIC_LOAD, N_TRAFFIC_LOAD and HIGH_THRESHOLD. |
|
CC |
|
|
NB_TIMES_TRAF_DETECTED_LOW |
C443 |
Resource Availability & Usage |
Number of times the traffic_load is "low". This counter permits to tune the following parameters: A_TRAFFIC_LOAD, N_TRAFFIC_LOAD and LOW_THRESHOLD. |
|
CC |
This measurement type provides a set of counters related to the availability of the CCCH, SDCCH or TCH channels.
Measurement Type 2 can be used in On-Demand Measurement-Campaigns. It can be activated per cell.
|
Type |
|
|
|
|
Meas. object |
|
|
AV_NB_AVAIL_CCCH |
C27 |
Resource Availability & Usage |
Average number of available CCCH channels. |
|
SI (20s) |
|
|
AV_NB_AVAIL_SDCCH |
C26 |
Resource Availability & Usage |
Average number of available SDCCH subchannels. |
|
SI (20s) |
|
|
AV_NB_AVAIL_TCH |
C250 |
Resource Availability & Usage |
Average number of available TCH (in HR or FR usage) radio timeslot. |
|
SI (20s) |
|
|
AV_NB_BUSY_SDCCH |
C30 |
Resource Availability & Usage |
Average number of busy SDCCH subchannels. |
|
SI (20s) |
|
|
AV_NB_BUSY_TCH |
C28 |
Resource Availability & Usage |
Average number of busy TCH radio timeslot (in FR or HR usage). |
|
SI (10s) |
|
|
AV_NB_IDLE_TCH_INTERF_BAND1 |
C320a |
Resource Availability & Usage |
Average number of idle TCH radio timeslot in FR or HR usage belonging to the interference band 1. |
|
SI (20s) |
|
|
AV_NB_IDLE_TCH_INTERF_BAND2 |
C320b |
Resource Availability & Usage |
Average number of idle TCH radio timeslot in FR or HR usage belonging to the interference band 2. |
|
SI (20s) |
|
|
AV_NB_IDLE_TCH_INTERF_BAND3 |
C320c |
Resource Availability & Usage |
Average number of idle TCH radio timeslot in FR or HR usage belonging to the interference band 3. |
|
SI (20s) |
|
|
AV_NB_IDLE_TCH_INTERF_BAND4 |
C320d |
Resource Availability & Usage |
Average number of idle TCH radio timeslot in FR or HR usage belonging to the interference band 4. |
|
SI (20s) |
|
|
AV_NB_IDLE_TCH_INTERF_BAND5 |
C320e |
Resource Availability & Usage |
Average number of idle TCH radio timeslot in FR or HR usage belonging to the interference band 5. |
|
SI (20s) |
|
|
AV_NB_NOT_AVAIL_TRX_TS |
C24 |
Resource Availability & Usage |
Average
number of not available radio |
|
SI (20s) |
|
|
AV_NB_TCH_QUEUED |
C141 |
Resource Availability & Usage |
Average number of queued TCH (in HR or FR usage) normal assignment or external handover -requests. |
|
SI (20s) |
|
|
NB_MAX_SIMUL_BUSY_SDCCH |
C31 |
Resource Availability & Usage |
Maximum number of simultaneously busy SDCCH subchannels. |
|
CC |
|
|
NB_MAX_SIMUL_BUSY_TCH |
C29 |
Resource Availability & Usage |
Maximum number of simultaneously busy TCH radio timeslots in HR or FR usage. |
|
CC |
|
|
TIME_ALL_AVAIL_SDCCH_BUSY |
C80 |
Resource Availability & Usage |
Cumulated time (in seconds) during which all available SDCCH subchannels are busy. |
|
CC |
|
|
TIME_ALL_AVAIL_TRX_TS_BUSY |
C34 |
Resource Availability & Usage |
Cumulated time (in seconds) during which all available radio timeslots (TRX_TS) of the cell are busy. |
|
CC |
This measurement type provides a set of counters related to the usage of the CCCH channel (PCH load, AGCH load, RACH load).
Measurement Type 3can be used in On-Demand Measurement-Campaigns. It can be activated per cell.
|
Type |
|
|
|
|
Meas. |
|
|
NB_CHAN_REQD |
C8c |
Traffic Load |
RACH load per TRX timeslot (number of 08.58CHANNEL REQUIRED received via the selected cell). |
TRX_TS |
CC |
|
|
NB_IMM_ASS_CMD |
C8b |
Traffic Load |
AGCH load per TRX timeslot (number of 08.58IMMEDIATE ASSIGNMENT COMMAND sent on Abis to the MS via the selected cell). |
TRX_TS |
CC |
|
|
NB_IMM_ASS_REJ |
C8d |
Traffic Load |
Number of rejected MS channel requests per TRX timeslot. No SDCCH can be allocated by the BSC due to congestion (number of 04.08IMMEDIATE ASSIGNMENT REJECT sent to the MS via the selected cell). |
TRX_TS |
CC |
|
|
NB_PAGING_CMD |
C8a |
Traffic Load |
PCH load per TRX timeslot (number of 08.58PAGING COMMAND sent on Abis towards the selected cell). |
TRX_TS |
CC |
This measurement type provides a set of counters related to the usage of the SDCCH channel.
Measurement Type 4 can be used in On-Demand Measurement-Campaigns. It can be activated per cell.
|
Type |
|
|
|
|
Meas. |
|
|
NB_TIMES_SDCCH_BUSY |
C39 |
Resource Availability & Usage |
Number of times the SDCCH subchannels belonging to the radio timeslot are busy. |
TRX_TS |
CC |
|
|
TIME_SDCCH_BUSY |
C40 |
Traffic Load |
Cumulated time during which the SDCCH subchannels belonging to the radio timeslot are busy. |
TRX_TS |
CC |
This measurement type
provides a set of counters releatedrelated
to the usage of the TCH channel (in HR or FR usage).
Measurement Type 5 can be used in On-Demand Measurement-Campaigns. It can be activated per cell.
|
Type |
|
|
|
|
Meas. |
|
|
NB_TCH_FR_ALLOC |
C370a |
Resource Availability & Usage |
Number of times the TCH radio timeslot is allocated in FR usage, for normal assignment or handover. |
TRX_TS |
CC |
|
|
NB_TCH_HR_ALLOC |
C370b |
Resource Availability & Usage |
Number of times the TCH radio timeslot is
allocated in HR usage ( |
TRX_TS |
CC |
|
|
TIME_FR_TCH_BUSY |
C380a |
Traffic Load |
Time (in seconds) during which the TCH radio timeslot in FR usage is busy. |
TRX_TS |
CC |
|
|
TIME_FR_TCH_BUSY_BY_MULTIBAND_MS |
C381a |
Traffic Load |
Time (in seconds) during which the TCH radio timeslot in FR usage is busy by a multiband mobile. |
TRX_TS |
CC |
|
|
TIME_HR_TCH_BUSY |
C380b |
Traffic Load |
Time during which the TCH radio timeslot in HR usage is busy (one or two HR subchannels are busy). |
TRX_TS |
CC |
|
|
TIME_HR_TCH_BUSY_BY_MULTIBAND_MS |
C381b |
Traffic Load |
Time during which the TCH radio timeslot in HR usage is busy by multiband mobiles (one or two HR subchannels are busy by a multiband mobile). |
TRX_TS |
CC |
This measurement type provides a set of counters related to the TCH handover procedure. The counters are provided per handover category : incoming and outgoing, internal (inter-cell and intra-cell) and external. The handover causes are also provided.
Measurement Type 6 can be used in On-Demand Measurement-Campaigns. It can be activated per cell.
|
Type |
|
|
|
|
Meas. |
|
|
NB_INC_EXT_TCH_HO_ATPT |
C221 |
Handover 16116n133q |
Number of incoming external TCH (in HR or FR usage) handover -attempts. |
|
CC |
|
|
NB_INC_EXT_TCH_HO_EXEC_FAIL_MS_ACCESS |
C43 |
Handover 16116n133q |
Number of incoming external TCH (in HR or FR usage) handover -execution failures due to MS access problem. |
|
CC |
|
|
NB_INC_EXT_TCH_HO_PREP_FAIL |
C41 |
Handover 16116n133q |
Number of incoming external TCH (in HR or FR usage) handover -preparation failures due to congestion (C41a), or A-traffic-channel status mismatch between the BSC and the MSC (C41b). |
|
CC |
|
|
NB_INC_EXT_TCH_HO_PREP_FAIL_CONG |
C41a |
Handover 16116n133q |
Number of incoming external TCH (in HR or FR usage) handover -preparation failures due to congestion. |
|
CC |
|
|
NB_INC_EXT_TCH_HO_PREP_FAIL_NO_TTCH |
C41b |
Handover 16116n133q |
Number of incoming external TCH (in HR or FR usage) handover -preparation failures due to A-traffic-channel status mismatch between the BSC and the MSC. |
|
CC |
|
|
NB_INC_EXT_TCH_HO_REQ |
C220 |
Handover 16116n133q |
Number of incoming external TCH (in HR or FR usage) handover -requests. |
|
CC |
|
|
NB_INC_EXT_TCH_HO_SUCC |
C42 |
Handover 16116n133q |
Number of incoming external TCH (in HR or FR usage) handover -successes. |
|
CC |
|
|
NB_INC_INT_TCH_HO_ATPT |
C231 |
Handover 16116n133q |
Number of incoming internal inter cell TCH (in HR or FR usage) handover -attempts. |
|
CC |
|
|
NB_INC_INT_TCH_HO_EXEC_FAIL_MS_ACCESS |
C53 |
Handover 16116n133q |
Number of
incoming internal inter-cell TCH (in HR or FR usage) handover -execution
failures due to MS access problem; the mobile may revert |
|
CC |
|
|
NB_INC_INT_TCH_HO_PREP_FAIL_CONG |
C51 |
Handover 16116n133q |
Number of incoming internal inter-cell TCH (in HR or FR usage) handover -preparation failures due to congestion. |
|
CC |
|
|
NB_INC_INT_TCH_HO_REQ |
C230 |
Handover 16116n133q |
Number of incoming internal inter cell TCH (in HR or FR usage) handover -requests. |
|
CC |
|
|
NB_INC_INT_TCH_HO_SUCC |
C52 |
Handover 16116n133q |
Number of incoming internal inter-cell TCH (in HR or FR usage) handover -successes. |
|
CC |
|
|
NB_INTRA_TCH_HO_ATPT |
C271 |
Handover 16116n133q |
Number of intra cell TCH (in HR or FR usage) handover -attempts. |
|
CC |
|
|
NB_INTRA_TCH_HO_EXEC_FAIL_NO_REV |
C63 |
Handover 16116n133q |
Number of intra-cell TCH (in HR or FR usage) handover -execution failures due MS access problem; the mobile is lost. |
|
CC |
|
|
NB_INTRA_TCH_HO_EXEC_FAIL_REV |
C67 |
Handover 16116n133q |
Number of intra-cell TCH (in HR or FR usage) handover -execution failures due to MS access problem with reversion of the mobile to the old channel. |
|
CC |
|
|
NB_INTRA_TCH_HO_PREP_FAIL_CONG |
C61 |
Handover 16116n133q |
Number of intra-cell TCH (in HR or FR usage) handover -preparation failures due to congestion. |
|
CC |
|
|
NB_INTRA_TCH_HO_REQ |
C270 |
Handover 16116n133q |
Number of intra cell TCH (in HR or FR usage) handover -requests. |
|
CC |
|
|
NB_INTRA_TCH_HO_SUCC |
C62 |
Handover 16116n133q |
Number of intra-cell TCH (in HR or FR usage) handover -successes. |
|
CC |
|
|
NB_OUT_EXT_TCH_HO_ATPT |
C50 |
Handover 16116n133q |
Number of outgoing external TCH (in HR or FR usage) handover -attempts. |
|
CC |
|
|
NB_OUT_EXT_TCH_HO_EXEC_FAIL_NO_REV |
C48 |
Handover 16116n133q |
Number of outgoing external TCH (in HR or FR usage) handover -execution failures due to MS access problem without reversion of the mobile to the old channel (call drop). |
|
CC |
|
|
NB_OUT_EXT_TCH_HO_EXEC_FAIL_REV |
C47 |
Handover 16116n133q |
Number of outgoing external TCH (in HR or FR usage) handover -execution failures due to MS access problem with reversion of the mobile to the old channel. |
|
CC |
|
|
NB_OUT_EXT_TCH_HO_REQ |
C45 |
Handover 16116n133q |
Number of outgoing external TCH (in HR or FR usage) handover -requests. |
|
CC |
|
|
NB_OUT_EXT_TCH_HO_SUCC |
C46 |
Handover 16116n133q |
Number of outgoing external TCH (in HR or FR usage) handover -successes. |
|
CC |
|
|
NB_OUT_INT_TCH_HO_ATPT |
C60 |
Handover 16116n133q |
Number of outgoing internal inter-cell TCH (in HR or FR usage) handover -attempts. |
|
CC |
|
|
NB_OUT_INT_TCH_HO_EXEC_FAIL_NO_REV |
C58 |
Handover 16116n133q |
Number of outgoing internal inter-cell TCH (in HR or FR usage) handover -execution failures due to MS access problem without reversion of the mobile to the old channel (call drop). |
|
CC |
|
|
NB_OUT_INT_TCH_HO_EXEC_FAIL_REV |
C57 |
Handover 16116n133q |
Number of outgoing internal inter-cell TCH (in HR or FR usage) handover -execution failures due to MS access problem with reversion of the mobile to the old channel. |
|
CC |
|
|
NB_OUT_INT_TCH_HO_IDR_IN_ZONE_EXEC_FAIL |
C412 |
Handover 16116n133q |
Number of outgoing internal inter-cell TCH (in HR or FR usage) handover -executions failures, plus the number of internal directed retries -execution failures due to MS access problem, towards the inner zone of a target concentric cell. This counter permits to tune the EN_BETTER_ZONE_HO parameter. |
|
CC |
|
|
NB_OUT_INT_TCH_HO_IDR_IN_ZONE_REQ |
C411 |
Handover 16116n133q |
Number of outgoing internal inter-cell TCH (in HR or FR usage) handover -requests, plus the number of internal directed retries -requests, towards the inner zone of a target concentric cell. |
|
CC |
|
|
NB_OUT_INT_TCH_HO_REQ |
C55a |
Handover 16116n133q |
Number of outgoing internal inter-cell TCH (in HR or FR usage) handover -requests. |
|
CC |
|
|
NB_OUT_INT_TCH_HO_SUCC |
C56 |
Handover 16116n133q |
Number of outgoing internal inter-cell TCH (in HR or FR usage) handover -successes. |
|
CC |
|
|
NB_TCH_HO_ATPT_10_TooLowLevUpInZone |
C586a |
Handover 16116n133q |
Number of intra-cell handover -attempts, with cause 10 "Inner zone uplink level too low" on TCH channel (in HR or FR usage). This counter is related to concentric cell environment. |
|
CC |
|
|
NB_TCH_HO_ATPT_11_TooLowLevDownInZone |
C586b |
Handover 16116n133q |
Number of intra-cell handover -attempts, with cause 11: "Inner zone downlink level too low" on TCH channel (in HR or FR usage). This counter is related to concentric cell environment. |
|
CC |
|
|
NB_TCH_HO_ATPT_12_TooLowPowBudg |
C478 |
Handover 16116n133q |
Number of inter-cell internal or external handover -attempts, with cause 12: "too low power budget" on a TCH channel (in FR or FR usage). |
|
CC |
|
|
NB_TCH_HO_ATPT_13_TooHighLevUpDownOutZone |
C586c |
Handover 16116n133q |
Number of intra-cell handover -attempts, with cause 13: "Outer zone uplink and downlink levels too high" on TCH channel (in HR or FR usage). This counter is related to concentric cell environment. |
|
CC |
|
|
NB_TCH_HO_ATPT_14_HighLevNeigLowCellSlowMS |
C585f |
Handover 16116n133q |
Number of inter-cell internal or external handover -attempts, with cause 14: "high level in neighbour lower layer for slow mobile" on a TCH channel (in HR or FR usage). This counter is related to micro cell environment. |
|
CC |
|
|
NB_TCH_HO_ATPT_15_TooHighLevInterfUp |
C476 |
Handover 16116n133q |
Number of intra-cell handover -attempts, with cause 15: "too high level interference on uplink" on a TCH channel (in HR or FR usage). |
|
CC |
|
|
NB_TCH_HO_ATPT_16_TooHighLevInterfDown |
C477 |
Handover 16116n133q |
Number of intra-cell handover -attempts, with cause 16: "too high level interference on downlink" on a TCH channel (in HR or FR usage). |
|
CC |
|
|
NB_TCH_HO_ATPT_17_TooLowLevUpMicroCell |
C585d |
Handover 16116n133q |
Number of inter-cell internal or external handovers -attempts, with cause 17: "too low level on the uplink in a microcell compared to a high threshold" on a TCH channel (in HR or FR usage).This counter is related to micro cell environment. |
|
CC |
|
|
NB_TCH_HO_ATPT_18_TooLowLevDownMicroCell |
C585e |
Handover 16116n133q |
Number of inter-cell internal or external handovers -attempts, with cause 18: "too low level on the downlink in a microcell compared to a high threshold" on a TCH channel (in HR or FR usage). This counter is related to micro cell environment. |
|
CC |
|
|
NB_TCH_HO_ATPT_2_TooLowQualUp |
C470 |
Handover 16116n133q |
Number of inter-cell internal or external handover -attempts, with cause 2: "uplink quality too low" on a TCH channel (in HR or FR usage). |
|
CC |
|
|
NB_TCH_HO_ATPT_21_HighLevNeigCellPrefBand |
C479 |
Handover 16116n133q |
Number of inter-cell internal or external handover -attempts, with cause 21: "high level in neighbour cell in the preferred band" on a TCH channel (in HR or FR usage). This counter is related to multiband. |
|
CC |
|
|
NB_TCH_HO_ATPT_22_TooShortDistance |
C450 |
Handover 16116n133q |
Number of inter-cell internal or external handovers -attempts, with cause 22: "too short MS-BTS distance" on a TCH channel (in HR or FR usage). Only the outer zone of concentric cells are concerned by this counter. |
|
CC |
|
|
NB_TCH_HO_ATPT_23_TrafHandover 16116n133q |
C440 |
Handover 16116n133q |
Number of inter-cell internal or external handover -attempts, with the cause 23: "traffic handover" on a TCH channel (in HR or FR usage). |
|
CC |
|
|
NB_TCH_HO_ATPT_24_GenCaptureHandover 16116n133q |
C444 |
Handover 16116n133q |
Number of inter-cell internal or external handover -attempts, with the cause 24: "general capture handover" on a TCH channel (in HR or FR usage). |
|
CC |
|
|
NB_TCH_HO_ATPT_3_TooLowLevUp |
C471 |
Handover 16116n133q |
Number of inter-cell internal or external handovers -attempts, with cause 3: "uplink level too low" on a TCH channel (in HR or FR usage). |
|
CC |
|
|
NB_TCH_HO_ATPT_4_TooLowQualDown |
C472 |
Handover 16116n133q |
Number of inter-cell internal or external handover -attempts, with cause 4: "downlink quality too low" on a TCH channel (in HR or FR usage). |
|
CC |
|
|
NB_TCH_HO_ATPT_5_TooLowLevDown |
C473 |
Handover 16116n133q |
Number of inter-cell internal or external handover -attempts, with cause 5: "downlink level too low" on a TCH channel (in HR or FR usage). |
|
CC |
|
|
NB_TCH_HO_ATPT_6_TooLongDistance |
C474 |
Handover 16116n133q |
Number of inter-cell internal or external handover -attempts, with cause 6: "MS-BTS distance too long" on a TCH channel (in HR or FR usage). |
|
CC |
|
|
NB_TCH_HO_ATPT_7_ConsBadSACCHmicroCell |
C585a |
Handover 16116n133q |
Number of inter-cell internal or external handover -attempts, with cause 7: "several consecutive bad SACCH frames received in a micro cell" on a TCH channel (in HR or FR usage). This counter is related to micro cell environment. |
|
CC |
|
|
NB_TCH_HO_MSC_TRIG |
C75 |
Handover 16116n133q |
Number of external handovers triggered by the MSC but not required by the BSS. |
|
CC |
|
|
NB_TCH_NOR_ASS_INNER_ZONE_ALLOC |
C413 |
Traffic Load |
Number of TCH
(in HR or FR usage) normal assignment -whose |
|
CC |
This measurement type provides a set of counters related to the LapD logical links.
Measurement Type 7 can be used in Permanent or On-Demand Measurement-Campaigns. It can be activated per BSS.
|
Type |
|
|
|
|
Meas. |
|
|
NB_LAPD_CRC_ERROR |
L1.12 |
Quality of Service |
Number of frames received with CRC error on the LapD link. |
LapD |
CC |
|
|
NB_LAPD_EST |
L1.17 |
Quality of Service |
Number of data link establishment, re-establishment and reset on the LapD link. |
LapD |
CC |
|
|
NB_LAPD_INFO_FRAME_REC |
L1.2 |
Traffic Load |
Number of Information frames received on the LapD link, excluding the re-transmissions. |
LapD |
CC |
|
|
NB_LAPD_INFO_FRAME_RESENT |
L1.15 |
Quality of Service |
Number of Information frames re-transmitted on the LapD link. |
LapD |
CC |
|
|
NB_LAPD_INFO_FRAME_SENT |
L1.1 |
Traffic Load |
Number of Information frames transmitted on the LapD link, excluding the re-transmissions. |
LapD |
CC |
|
|
NB_LAPD_RNR_REC |
L1.6 |
Quality of Service |
Number of Receive Not Ready (RNR) frames received on the LapD link. |
LapD |
CC |
|
|
NB_LAPD_RNR_SENT |
L1.5 |
Quality of Service |
Number of Receive Not Ready (RNR) frames transmitted on the LapD link. |
LapD |
CC |
|
|
TIME_LAPD_UNAVAIL |
L1.16 |
Resource Availability & Usage |
Time (in seconds) during which the LapD link is unavailable for any cause. |
LapD |
CC |
This measurement type provides a set of counters related to the X25 links OMC-BSC.
Measurement Type 8 can be used in Permanent or On-Demand Measurement-Campaigns. It can be activated per BSS.
|
Type |
|
|
|
|
Meas. |
|
|
NB_X25_INC_CALL_ABNORM_CLOSED |
X3.22 |
Quality of Service |
Number of incoming X25 calls that are closed in an abnormal way, as seen by the BSC. |
X25 |
CC |
|
|
NB_X25_INC_CALL_SUCC_CLOSED |
X3.20 |
Traffic Load |
Number of incoming X25 calls that are successfully closed by the BSC. |
X25 |
CC |
|
|
NB_X25_OUT_CALL_ABNORM_CLOSED |
X3.23 |
Quality of Service |
Number of outgoing X25 calls that are closed in an abnormal way, as seen by the BSC. |
X25 |
CC |
|
|
NB_X25_OUT_CALL_SUCC_CLOSED |
X3.21 |
Traffic Load |
Number of outgoing X25 calls that are successfully closed by the BSC. |
X25 |
CC |
This measurement type provides a set of counters related to the N7 Signalling Links. Note that in the BSS context, the Link Set and the Route Set are identical.
Measurement Type 9 can be used in Permanent or On-Demand Measurement-Campaigns. It can be activated per BSS.
|
Type |
|
|
|
|
Meas. |
|
|
NB_N7_CHANGEBACK |
N1.11 |
Quality of Service |
Number of change-backs from the secondary (observed) N7 SL to the primary one. |
|
CC |
|
|
NB_N7_CHANGEOVER |
N1.10 |
Quality of Service |
Number of changeovers from the primary (observed) N7 SL to another secondary one. |
|
CC |
|
|
NB_N7_CONG_WITH_MSU_LOST |
N3.11 |
Quality of Service |
Number of times one (or more) Message Signalling Units (MSU) are lost due to congestion on the N7 SL. |
|
CC |
|
|
NB_N7_LINK_FAIL_ALIGNMENT |
N1.7 |
Quality of Service |
Number of N7 SL failures due to expiry of timer supervising the alignment. |
|
CC |
|
|
NB_N7_LINK_FAIL_ANY_CAUSE |
N1.2 |
Quality of Service |
Number of N7 SL failures (any reason). |
|
CC |
|
|
NB_N7_LINK_FAIL_CONG |
N1.6 |
Quality of Service |
Number of N7 SL failures due to congestion during an extended period of time. |
|
CC |
|
|
NB_N7_LINK_FAIL_FIB_BSN |
N1.3 |
Quality of Service |
Number of Forward Indicator Bits (FIB) and Backward Sequence Number (BSN) on the N7 SL. |
|
CC |
|
|
NB_N7_LINK_FAIL_SU_ERROR_RATE |
N1.5 |
Quality of Service |
Number of N7 SL failures due to |
|
CC |
|
|
NB_N7_LINK_FAIL_T7_EXP |
N1.4 |
Quality of Service |
Number of N7 SL failures due to non |
|
CC |
|
|
NB_N7_MSU_DISC_DUE_CONG |
N3.10 |
Quality of Service |
Number Message Signalling Units (MSU) discarded due to a message buffer overflow caused by an extended period of Signalling Link congestion. |
|
CC |
|
|
NB_N7_MSU_REC |
N3.5 |
Traffic Load |
Number of Message Signalling Units (MSU) received on the N7 SL. |
N7 SL |
CC |
|
|
NB_N7_MSU_SENT |
N3.3 |
Traffic Load |
Number of Message Signalling Units (MSU) transmitted on the N7 SL. |
N7 SL |
CC |
|
|
NB_N7_NEG_ACK_REC |
N1.9 |
Quality of Service |
Number of Negative |
N7 SL |
CC |
|
|
NB_N7_OCTETS_RESENT |
N3.2 |
Traffic Load |
Number of octets re-transmitted on the N7 SL. |
N7 SL |
CC |
|
|
NB_N7_RESTORATION |
N1.12 |
Quality of Service |
Number of N7 SL restorations (i.e. correctly aligned after a failure). |
N7 SL |
CC |
|
|
NB_N7_SIF_SIO_REC |
N3.4 |
Traffic Load |
Number of octets of Signalling Information Field (SIF) and Service Information Octets (SIO) received on the N7 SL. |
N7 SL |
CC |
|
|
NB_N7_SIF_SIO_SENT |
N3.1 |
Traffic Load |
Number of octets of Signalling Information (SIF) and Service Information Octets (SIO) transmitted on the N7 SL. |
N7 SL |
CC |
|
|
NB_N7_SU_REC_WITH_ERROR |
N1.8 |
Quality of Service |
Number of Signalling Units received with errors on the N7 SL. |
N7 SL |
CC |
|
|
TIME_N7_ALIGNED |
N1.1 |
Resource Availability & Usage |
Time (in seconds) during which the N7 SL is correctly aligned. |
N7 SL |
CC |
|
|
TIME_N7_NOT_ALIGNED |
N2.1 |
Resource Availability & Usage |
Time (in seconds) during which the N7 SL |
N7 SL |
CC |
|
|
TIME_N7_UNAVAIL_CONG |
N3.7 |
Resource Availability & Usage |
Time (in seconds) during which the N7 SL is not available due to congestion. |
N7 SL |
CC |
|
|
TIME_N7_UNAVAIL_ERROR_SL |
N2.7 |
Resource Availability & Usage |
Time (in seconds) during which the N7 SL is not correctly aligned due to a fault on the N7 SL. |
N7 SL |
CC |
|
|
TIME_N7_UNAVAIL_LINK_SET |
N4.2 |
Resource Availability & Usage |
Time (in seconds) during which the Link Set towards the MSC is not available on the N7. |
N7 SL |
CC |
|
|
TIME_N7_UNAVAIL_MSC_PROC_OUTAGE |
N2.9 |
Resource Availability & Usage |
Time (in seconds) during which the N7 SL is not available due to a remote MSC processor outage. |
N7
SL |
CC |
This measurement type provides a set of counters related to the different causes of 08.08CLEAR REQUEST and 08.08ASSIGNMENT FAILURE transmitted on the A-interface.
This measurement type is intended for investigation of A-interface protocol problems.
Measurement Type 18 can be used in Permanent or On-Demand Measurement-Campaigns. It can be activated per cell.
|
Type |
|
|
|
|
Meas. |
|
|
NB_N7_ASS_FAIL_BSSnotEquip |
C181j |
Quality of Service |
Number of
08.08ASSIGNMENT FAILURE (cause="BSS not |
BSC |
CC |
|
|
NB_N7_ASS_FAIL_CipherAlgoNotSupp |
C181i |
Quality of Service |
Number of 08.08ASSIGNMENT FAILURE (cause="ciphering algorithm not supported") sent to the MSC. |
BSC |
CC |
|
|
NB_N7_ASS_FAIL_EquipFail |
C181c |
Quality of Service |
Number of 08.08ASSIGNMENT FAILURE (cause="equipment failure") sent to the MSC. |
BSC |
CC |
|
|
NB_N7_ASS_FAIL_NoRadioResAvail |
C181d |
Quality of Service |
Number of 08.08ASSIGNMENT FAILURE (cause="no radio resource available") sent to the MSC. |
BSC |
CC |
|
|
NB_N7_ASS_FAIL_O&Minterv |
C181b |
Quality of Service |
Number of 08.08ASSIGNMENT FAILURE (cause="O&M intervention") sent to the MSC. |
BSC |
CC |
|
|
NB_N7_ASS_FAIL_ProtocolError |
C181k |
Quality of Service |
Number of 08.08ASSIGNMENT FAILURE (cause="protocol error between BSC and MSC") sent to the MSC. |
BSC |
CC |
|
|
NB_N7_ASS_FAIL_RadioIntFail |
C181h |
Quality of Service |
Number of 08.08ASSIGNMENT FAILURE (cause="radio interface failure") sent to the MSC. |
BSC |
CC |
|
|
NB_N7_ASS_FAIL_RadioIntFailRevOldChan |
C181g |
Quality of Service |
Number of 08.08ASSIGNMENT FAILURE (cause="radio interface failure -reversion to old channel") sent to the MSC. |
BSC |
CC |
|
|
NB_N7_ASS_FAIL_RadioIntMessFail |
C181a |
Quality of Service |
Number of 08.08ASSIGNMENT FAILURE (cause="radio interface message failure") sent to the MSC. |
BSC |
CC |
|
|
NB_N7_ASS_FAIL_ReqSpeechVersUnav |
C181l |
Quality of Service |
Number of 08.08ASSIGNMENT FAILURE (cause="requested speech version unavailable") sent to the MSC. |
BSC |
CC |
|
|
NB_N7_ASS_FAIL_ReqTerResUnav/Alloc |
C181e |
Quality of Service |
Number of 08.08ASSIGNMENT FAILURE (cause="requested terrestrial resource unavailable", or "terrestrial resource already allocated") sent to the MSC. |
BSC |
CC |
|
|
NB_N7_ASS_FAIL_ReqTrans/RateUnav |
C181f |
Quality of Service |
Number of 08.08ASSIGNMENT FAILURE (cause="requested transcoding/rate adaptation unavailable") sent to the MSC. |
BSC |
CC |
|
|
NB_N7_CLEAR_REQ_EquipFail |
C180c |
Quality of Service |
Number of 08.08CLEAR REQUEST (cause="equipment failure") sent to the MSC. |
BSC |
CC |
|
|
NB_N7_CLEAR_REQ_EST_PHAS |
C182 |
Quality of Service |
Number of 08.08 CLEAR REQUEST sent to the MSC for calls in TCH established phase, and for internal inter-cell and external TCH handover failures. Intra-cell handover failures are not taken into account. |
BSC |
CC |
|
|
NB_N7_CLEAR_REQ_NoRadioResAvail |
C180e |
Quality of Service |
Number of 08.08CLEAR REQUEST (cause="no radio resource available") sent to the MSC. |
BSC |
CC |
|
|
NB_N7_CLEAR_REQ_O&Minterv |
C180b |
Quality of Service |
Number of 08.08CLEAR REQUEST (cause="O&M intervention") sent to the MSC. |
BSC |
CC |
|
|
NB_N7_CLEAR_REQ_RadioIntFail |
C180d |
Quality of Service |
Number of 08.08CLEAR REQUEST (cause="radio interface failure") sent to the MSC. |
BSC |
CC |
|
|
NB_N7_CLEAR_REQ_RadioIntMessFail |
C180a |
Quality of Service |
Number of 08.08CLEAR REQUEST (cause="radio interface message failure") sent to the MSC. |
BSC |
CC |
This measurement type provides a set of counters related to the Short-Message-Service Point-to-Point. The SMS transactions on SDCCH and SACCH channels, originating or terminating, are counted.
This measurement type is intended to help for supervision of the SMS-PP usage and for investigation of SMS-PP usage problems.
Measurement Type 19 can be used in Permanent or On-Demand Measurement-Campaigns. It can be activated per cell.
|
Type |
|
|
|
|
Meas. |
|
|
NB_SMS_PP_CON_MO_SACCH |
C192 |
Quality of Service |
Number of Mobile Originating SMS connections on SACCH. |
|
CC |
|
|
NB_SMS_PP_CON_MO_SDCCH |
C190 |
Quality of Service |
Number of Mobile Originating SMS connections on SDCCH. |
|
CC |
|
|
NB_SMS_PP_CON_MT_SACCH |
C193 |
Quality of Service |
Number of Mobile Terminating SMS connections on SACCH. |
|
CC |
|
|
NB_SMS_PP_CON_MT_SDCCH |
C191 |
Quality of Service |
Number of Mobile Terminating SMS connections on SDCCH. |
|
CC |
|
|
NB_SMS_PP_CON_REJ_BSSnotEquip |
C194b |
Quality of Service |
Number of SMS connection rejections by the BSC with the cause "BSS not equipped". |
|
CC |
|
|
NB_SMS_PP_CON_REJ_ProtocolError |
C194c |
Quality of Service |
Number of SMS connection rejections by the BSC with the cause "protocol error between BSC and MSC". |
|
CC |
|
|
NB_SMS_PP_CON_REJ_RadioIntFail |
C194a |
Quality of Service |
Number of SMS connection rejections by the BSC with the cause "radio interface failure". |
|
CC |
|
|
NB_SMS_PP_CON_REL_LAPDM_ERROR |
C195 |
Quality of Service |
Number of SMS
connection releases of established SMS SAPI 3 connections by the BSC due to a
|
|
CC |
This measurement type provides a set of counters related to the SCCP layer of the N7 Signalling Link. It is intended to help for supervision of the SCCP performance and for investigation of SCCP problems.
Measurement Type 25 can be used in Permanent or On-Demand Measurement-Campaigns. It can be activated per BSS.
|
Type |
|
|
|
|
Meas. |
|
|
NB_N7_CON_CONF_REC |
C256 |
Traffic Load |
Number of CONNECTION CONFIRM received from the MSC. |
N7
SL |
CC |
|
|
NB_N7_CON_CONF_SENT |
C255 |
Traffic Load |
Number of CONNECTION CONFIRM sent to the MSC. |
N7
SL |
CC |
|
|
NB_N7_CON_EST_FAIL_DUE_BSS |
C153b |
Quality of Service |
Number of BSS originating SCCP connection failures due to the BSS. |
N7
SL |
CC |
|
|
NB_N7_CON_EST_FAIL_DUE_NSS |
C153a |
Quality of Service |
Number of BSS originating SCCP connection failures due to the NSS. |
N7
SL |
CC |
|
|
NB_N7_CON_REF_REC |
C258 |
Quality of Service |
Number of CONNECTION REFUSED received from the MSC. |
N7
SL |
CC |
|
|
NB_N7_CON_REF_SENT |
C257 |
Quality of Service |
Number of CONNECTION REFUSED sent to the MSC. |
N7
SL |
CC |
|
|
NB_N7_CON_REQ_REC |
C254 |
Traffic Load |
Number of CONNECTION REQUEST received from the MSC. |
N7
SL |
CC |
|
|
NB_N7_CON_REQ_SENT |
C253 |
Traffic Load |
Number of CONNECTION REQUEST sent to the MSC. |
N7
SL |
CC |
|
|
NB_N7_UNIT_DATA_REC |
C252 |
Traffic Load |
Number of connectionless Unit Data messages class 0 received from the MSC. |
N7
SL |
CC |
|
|
NB_N7_UNIT_DATA_SENT |
C251 |
Traffic Load |
Number of connectionless Unit Data messages class 0 sent to the MSC. |
N7
SL |
CC |
This measurement type provides a set of counters related to outgoing TCH handover provided per adjacency. Each counter is reported for up to 64 target cells (only target cells with counter values > 0 are reported). The serving cell is identified by LAC and CI.
Measurement Type 26 can be used in On-Demand Measurement-Campaigns. It can be activated one serving cell.
|
Type |
|
|
|
|
Meas. |
|
|
NB_ADJ_SCELL_OUT_TCH_HO_12_NOT_TRIG |
C451 |
Adjacency |
Number of times the TCH (in HR or FR usage) handover cause 12: "power budget" is not triggered because of the relation: AV_RXLEV_PBGT_HO =< RXLEV_LIMIT_PBGT_HO. This counter permits to tune the parameter RXLEV_LIMIT_PBGT_HO provided per serving cell, and above all to detect the overlapping or resurgence zones between two cells. |
|
CC |
|
|
NB_ADJ_SCELL_OUT_TCH_HO_13_NOT_TRIG |
C453 |
Adjacency |
Number of times the TCH (in HR or FR usage) handover cause 13: "too high level on the uplink and downlink, outer zone" is not triggered because of the relation: AV_RXLEV_NCELL (n) =< NEIGHBOUR_RXLEV(0,n). |
|
CC |
|
|
NB_ADJ_SCELL_OUT_TCH_HO_23_ATPT |
C441 |
Adjacency |
Number of TCH (in HR or FR usage) handover -attempts cause 23: "traffic handover". This counter permits to tune the EN_TRAFFIC_HO flag per adjacency. |
|
CC |
|
|
NB_ADJ_SCELL_OUT_TCH_HO_ATPT |
C720 |
Adjacency |
Number of outgoing external and internal inter-cell TCH (in HR or FR usage) handover -attempts. |
|
CC |
|
|
NB_ADJ_SCELL_OUT_TCH_HO_EXEC_FAIL_NO_REV |
C723 |
Adjacency |
Number of outgoing external and internal inter-cell TCH (in HR or FR usage) handover -execution failures due to MS access problem, without reversion of the mobile to the old channel. |
|
CC |
|
|
NB_ADJ_SCELL_OUT_TCH_HO_EXEC_FAIL_REV |
C722 |
Adjacency |
Number of outgoing external and internal inter-cell TCH (in HR or FR usage) handover -execution failures due to MS access problem with reversion of the mobile to the old channel. |
|
CC |
|
|
NB_ADJ_SCELL_OUT_TCH_HO_SUCC |
C721 |
Adjacency |
Number of outgoing external and internal inter-cell TCH (in HR or FR usage) handover -successes. |
|
CC |
This measurement type provides a set of counters related to incoming TCH handover provided per adjacency. Each counter is reported for up to 64 serving cells (only serving cells with counter values > 0 are reported). The serving cell is identified by LAC and CI.
Measurement Type 27 can be used in On-Demand Measurement-Campaigns. It can be activated one target cell.
|
Type |
|
|
|
|
Meas. |
|
|
NB_ADJ_TCELL_INC_TCH_HO_ATPT |
C730 |
Adjacency |
Number of incoming external and internal inter-cell TCH (in HR or FR usage) handover -attempts. |
|
CC |
|
|
NB_ADJ_TCELL_INC_TCH_HO_EXEC_FAIL_MS_ACC |
C733 |
Adjacency |
Number of incoming external and internal inter-cell TCH (in HR or FR usage) handover -execution failures due to MS access problem, with or without reversion of the mobile to the old channel. |
|
CC |
|
|
NB_ADJ_TCELL_INC_TCH_HO_SUCC |
C731 |
Adjacency |
Number of incoming external and internal inter-cell TCH (in HR or FR usage) handover -successes. |
|
CC |
This measurement type provides a set of counters related to SDCCH handover procedure. The counters are provided per handover category : incoming and outgoing, internal (inter-cell and intra-cell) and external. The handover causes are also provided.
Measurement Type 28 can be used in Permanent or On-Demand Measurement-Campaigns. It can be activated per cell.
|
Type |
|
|
|
|
Meas. |
|
|
NB_INC_EXT_SDCCH_HO_ATPT |
C311 |
Handover 16116n133q |
Number of incoming external SDCCH handover -attempts. |
|
CC |
|
|
NB_INC_EXT_SDCCH_HO_EXEC_FAIL_MS_ACCESS |
C83 |
Handover 16116n133q |
Number of incoming external SDCCH handover -execution failures due to MS access problem. |
|
CC |
|
|
NB_INC_EXT_SDCCH_HO_PREP_FAIL_CONG |
C81 |
Handover 16116n133q |
Number of incoming external SDCCH handover -preparation failures due to congestion. |
|
CC |
|
|
NB_INC_EXT_SDCCH_HO_REQ |
C310 |
Handover 16116n133q |
Number of incoming external SDCCH handover -requests. |
|
CC |
|
|
NB_INC_EXT_SDCCH_HO_SUCC |
C82 |
Handover 16116n133q |
Number of incoming external SDCCH handover -successes. |
|
CC |
|
|
NB_INC_INT_SDCCH_HO_ATPT |
C331 |
Handover 16116n133q |
Number of incoming internal inter-cell SDCCH handover -attempts. |
|
CC |
|
|
NB_INC_INT_SDCCH_HO_EXEC_FAIL_MS_ACCESS |
C93 |
Handover 16116n133q |
Number of incoming internal inter-cell SDCCH handover -execution failures due to MS access problem. |
|
CC |
|
|
NB_INC_INT_SDCCH_HO_PREP_FAIL_CONG |
C91 |
Handover 16116n133q |
Number of incoming internal inter-cell SDCCH handover -preparation failures due to congestion. |
|
CC |
|
|
NB_INC_INT_SDCCH_HO_REQ |
C330 |
Handover 16116n133q |
Number of incoming internal inter-cell SDCCH handover -requests. |
|
CC |
|
|
NB_INC_INT_SDCCH_HO_SUCC |
C92 |
Handover 16116n133q |
Number of incoming internal inter-cell SDCCH handover -successes. |
|
CC |
|
|
NB_INTRA_SDCCH_HO_ATPT |
C361 |
Handover 16116n133q |
Number of intra-cell SDCCH handover -attempts. |
|
CC |
|
|
NB_INTRA_SDCCH_HO_EXEC_FAIL_NO_REV |
C103 |
Handover 16116n133q |
Number of intra-cell SDCCH handover -execution failures due to MS access problem without reversion to the old channel. |
|
CC |
|
|
NB_INTRA_SDCCH_HO_EXEC_FAIL_REV |
C107 |
Handover 16116n133q |
Number of intra-cell SDCCH handover -execution failures due to MS access problem with reversion to the old channel. |
|
CC |
|
|
NB_INTRA_SDCCH_HO_PREP_FAIL_CONG |
C101 |
Handover 16116n133q |
Number of intra-cell SDCCH handover -preparation failures due to congestion. |
|
CC |
|
|
NB_INTRA_SDCCH_HO_REQ |
C360 |
Handover 16116n133q |
Number of intra-cell SDCCH handover -requests. |
|
CC |
|
|
NB_INTRA_SDCCH_HO_SUCC |
C102 |
Handover 16116n133q |
Number of intra-cell SDCCH handover -successes. |
|
CC |
|
|
NB_OUT_EXT_SDCCH_HO_ATPT |
C90 |
Handover 16116n133q |
Number of outgoing external SDCCH handover -attempts. |
|
CC |
|
|
NB_OUT_EXT_SDCCH_HO_EXEC_FAIL_NO_REV |
C88 |
Handover 16116n133q |
Number |
|
CC |
|
|
NB_OUT_EXT_SDCCH_HO_EXEC_FAIL_REV |
C87 |
Handover 16116n133q |
Number of |
|
CC |
|
|
NB_OUT_EXT_SDCCH_HO_REQ |
C85 |
Handover 16116n133q |
Number of outgoing external SDCCH handover -requests. |
|
CC |
|
|
NB_OUT_EXT_SDCCH_HO_SUCC |
C86 |
Handover 16116n133q |
Number of outgoing external SDCCH handover -successes. |
|
CC |
|
|
NB_OUT_INT_SDCCH_HO_ATPT |
C100 |
Handover 16116n133q |
Number of outgoing internal inter-cell SDCCH handover -attempts. |
|
CC |
|
|
NB_OUT_INT_SDCCH_HO_EXEC_FAIL_NO_REV |
C98 |
Handover 16116n133q |
Number |
|
CC |
|
|
NB_OUT_INT_SDCCH_HO_EXEC_FAIL_REV |
C97 |
Handover 16116n133q |
Number of |
|
CC |
|
|
NB_OUT_INT_SDCCH_HO_REQ |
C95a |
Handover 16116n133q |
Number of outgoing internal inter-cell SDCCH handover -requests. |
|
CC |
|
|
NB_OUT_INT_SDCCH_HO_SUCC |
C96 |
Handover 16116n133q |
Number of outgoing internal inter-cell SDCCH handover -successes. |
|
CC |
|
|
NB_SDCCH_HO_ATPT_12_TooLowPowBudg |
C518 |
Handover 16116n133q |
Number of SDCCH inter-cell internal or external handover -attempts with cause 12: "too low power budget". |
|
CC |
|
|
NB_SDCCH_HO_ATPT_14_HighLevNeigLowCellSlowMS |
C605f |
Handover 16116n133q |
Number of SDCCH inter-cell internal or external handover -attempts with cause 14: "high level in neighbour lower layer cell for slow mobile". This counter is related to micro cell environment. |
|
CC |
|
|
NB_SDCCH_HO_ATPT_15_TooHighLevInterfUp |
C516 |
Handover 16116n133q |
Number of SDCCH intra-cell handover -attempts with cause 15: "too high level interference on uplink". |
|
CC |
|
|
NB_SDCCH_HO_ATPT_16_TooHighLevInterfDown |
C517 |
Handover 16116n133q |
Number of SDCCH intra-cell handover -attempts with cause 16: "too high level interference on downlink". |
|
CC |
|
|
NB_SDCCH_HO_ATPT_17_TooLowLevUpMicroCell |
C605d |
Handover 16116n133q |
Number of SDCCH inter-cell internal or external handover -attempts with cause 17 "too low level on the uplink in a microcell compared to a high threshold". This counter is related to micro cell environment. |
|
CC |
|
|
NB_SDCCH_HO_ATPT_18_TooLowLevDownMicroCell |
C605e |
Handover 16116n133q |
Number of SDCCH inter-cell internal or external handover -attempts with cause 18: "too low level on the downlink in a microcell compared to a high threshold". This counter is related to micro cell environment. |
|
CC |
|
|
NB_SDCCH_HO_ATPT_2_TooLowQualUp |
C510 |
Handover 16116n133q |
Number of SDCCH inter-cell internal or external handover -attempts triggered with cause 2: "uplink quality too low". |
|
CC |
|
|
NB_SDCCH_HO_ATPT_20_HighLevNeigCellForcDR |
C607 |
Handover 16116n133q |
Number of SDCCH inter-cell internal or external handover -attempts with cause 20: "forced directed retry". This counter is related to a forced directed retry (internal or external). |
|
CC |
|
|
NB_SDCCH_HO_ATPT_21_HighLevNeigCellPrefBand |
C519 |
Handover 16116n133q |
Number of SDCCH inter-cell internal or external handover -attempts with cause 21: "high level in neighbour cell in the preferred band". This counter is related to multiband. |
|
CC |
|
|
NB_SDCCH_HO_ATPT_22_TooShortDistance |
C454 |
Handover 16116n133q |
Number of SDCCH inter-cell internal or external handover -attempts with cause 22: "too short MS-BTS distance". This cause is restricted to the extended cells. This counter counts also the directed retries. |
|
CC |
|
|
NB_SDCCH_HO_ATPT_23_TrafHandover 16116n133q |
C445 |
Handover 16116n133q |
Number of inter-cell internal or external handover -attempts, with the cause 23: "traffic handover" on SDCCH. This counter counts also the directed retries. |
|
CC |
|
|
NB_SDCCH_HO_ATPT_24_GenCaptureHandover 16116n133q |
C446 |
Handover 16116n133q |
Number of inter-cell internal or external handover -attempts, with the cause 24: "general capture handover" on SDCCH. This counter counts also the directed retries. |
|
CC |
|
|
NB_SDCCH_HO_ATPT_3_TooLowLevUp |
C511 |
Handover 16116n133q |
Number of SDCCH inter-cell internal or external handover -attempts with cause 3: "uplink level too low". |
|
CC |
|
|
NB_SDCCH_HO_ATPT_4_TooLowQualDown |
C512 |
Handover 16116n133q |
Number of SDCCH inter-cell internal or external handover -attempts with cause 4: "downlink quality too low". |
|
CC |
|
|
NB_SDCCH_HO_ATPT_5_TooLowLevDown |
C513 |
Handover 16116n133q |
Number of SDCCH inter-cell internal or external handover -attempts triggered with cause 5: "downlink level too low". |
|
CC |
|
|
NB_SDCCH_HO_ATPT_6_TooLongDistance |
C514 |
Handover 16116n133q |
Number of SDCCH inter-cell internal or external handover -attempts with cause 6: "MS-BTS distance too long". |
|
CC |
|
|
NB_SDCCH_HO_ATPT_7_ConsBadSACCHmicroCell |
C605a |
Handover 16116n133q |
Number of
SDCCH inter-cell internal or external handover - |
|
CC |
|
|
NB_SDCCH_HO_MSC_TRIG |
C115 |
Handover 16116n133q |
Number of external handovers triggered by the MSC but not required by the BSS. |
|
CC |
This measurement type provides a set of counters related to the directed retry procedure. The counters are provided per directed retry category : incoming and outgoing, internal and external, forced and normal.
Measurement Type 29 can be used in On-Demand-Measurement-Campaigns. It can be activated per cell.
|
Type |
|
|
|
|
Meas. |
|
|
NB_INC_IDR_ATPT |
C154 |
Handover 16116n133q |
Number of incoming internal directed retry (forced or normal) -attempts. The target TCH channel can be in HR or FR usage. |
|
CC |
|
|
NB_INC_IDR_EXEC_FAIL_MS_ACCESS |
C152 |
Handover 16116n133q |
Number of incoming internal directed retry (forced or normal) -execution failures due to MS access problem. The target TCH channel can be in HR or FR usage. |
|
CC |
|
|
NB_INC_IDR_PREP_FAIL_CONG |
C155 |
Handover 16116n133q |
Number of incoming internal directed retry (forced or normal) -preparation failures due to congestion. The target TCH channel can be in HR or FR usage. |
|
CC |
|
|
NB_INC_IDR_REQ |
C153 |
Handover 16116n133q |
Number of incoming internal directed retry (forced or normal) -requests. The target TCH channel can be in HR or FR usage. |
|
CC |
|
|
NB_INC_IDR_SUCC (29) |
C151 |
Handover 16116n133q |
Number of incoming internal directed retry (forced or normal, towards a TCH channel in HR or FR usage) -successes. |
|
CC |
|
|
NB_OUT_FORCED_EDR_ATPT |
C145b |
Handover 16116n133q |
Number of outgoing forced external directed retry -attempts. The target TCH channel can be in HR or FR usage. |
|
CC |
|
|
NB_OUT_FORCED_EDR_EXEC_FAIL_NO_REV |
C143d |
Handover 16116n133q |
Number of outgoing forced external directed retry -execution failures due to MS access problem without reversion to the old channel. The target TCH channel can be in HR or FR usage. |
|
CC |
|
|
NB_OUT_FORCED_EDR_EXEC_FAIL_REV |
C143c |
Handover 16116n133q |
Number of outgoing forced external directed retry -execution failures due to MS access problem with reversion to the old channel. The target TCH channel can be in HR or FR usage. |
|
CC |
|
|
NB_OUT_FORCED_EDR_REQ |
C144b |
Handover 16116n133q |
Number of outgoing forced external directed retry -requests. The target TCH channel can be in HR or FR usage. |
|
CC |
|
|
NB_OUT_FORCED_EDR_SUCC |
C142b |
Handover 16116n133q |
Number of outgoing forced external directed retry (towards a TCH channel in HR or FR usage) -successes. |
|
CC |
|
|
NB_OUT_FORCED_IDR_ATPT |
C145a |
Handover 16116n133q |
Number of outgoing forced internal directed retry -attempts. The target TCH channel can be in HR or FR usage. |
|
CC |
|
|
NB_OUT_FORCED_IDR_EXEC_FAIL_NO_REV |
C143b |
Handover 16116n133q |
Number of outgoing forced internal directed retry -execution failures due to MS access problem without reversion to the old channel. The target TCH channel can be in HR or FR usage. |
|
CC |
|
|
NB_OUT_FORCED_IDR_EXEC_FAIL_REV |
C143a |
Handover 16116n133q |
Number of outgoing forced internal directed retry -execution failures due to MS access problem with reversion to the old channel. The target TCH channel can be in HR or FR usage. |
|
CC |
|
|
NB_OUT_FORCED_IDR_REQ |
C144a |
Handover 16116n133q |
Number of outgoing forced internal directed retry (towards a TCH channel in HR or FR usage) -requests. |
|
CC |
|
|
NB_OUT_FORCED_IDR_SUCC |
C142a |
Handover 16116n133q |
Number of outgoing forced internal directed retry (towards a TCH channel in HR or FR usage) -successes. |
|
CC |
|
|
NB_OUT_NOR_EDR_ATPT |
C145d |
Handover 16116n133q |
Number of outgoing normal external directed retry -attempts. The target TCH channel can be in HR or FR usage. |
|
CC |
|
|
NB_OUT_NOR_EDR_EXEC_FAIL_NO_REV |
C143h |
Handover 16116n133q |
Number of outgoing normal external directed retry -execution failures due to MS access problem without reversion to the old channel. The target TCH channel can be in HR or FR usage. |
|
CC |
|
|
NB_OUT_NOR_EDR_EXEC_FAIL_REV |
C143g |
Handover 16116n133q |
Number of outgoing normal external directed retry -execution failures due to MS access problem with reversion to the old channel. The target TCH channel can be in HR or FR usage. |
|
CC |
|
|
NB_OUT_NOR_EDR_REQ |
C144d |
Handover 16116n133q |
Number of outgoing normal external directed retry -requests. The target TCH channel can be in HR or FR usage. |
|
CC |
|
|
NB_OUT_NOR_EDR_SUCC |
C142d |
Handover 16116n133q |
Number of outgoing normal external directed retry (towards a TCH channel in HR or FR usage) -successes. |
|
CC |
|
|
NB_OUT_NOR_IDR_ATPT |
C145c |
Handover 16116n133q |
Number of outgoing normal internal directed retry -attempts. The target TCH channel can be in HR or FR usage. |
|
CC |
|
|
NB_OUT_NOR_IDR_EXEC_FAIL_NO_REV |
C143f |
Handover 16116n133q |
Number of outgoing normal internal directed retry -execution failures due to MS access problem without reversion to the old channel. The target TCH channel can be in HR or FR usage. |
|
CC |
|
|
NB_OUT_NOR_IDR_EXEC_FAIL_REV |
C143e |
Handover 16116n133q |
Number of outgoing normal internal directed retry -execution failures due to MS access problem with reversion to the old channel. The target TCH channel can be in HR or FR usage. |
|
CC |
|
|
NB_OUT_NOR_IDR_REQ |
C144c |
Handover 16116n133q |
Number of outgoing normal internal directed retry -requests. The target TCH channel can be in HR or FR usage. |
|
CC |
|
|
NB_OUT_NOR_IDR_SUCC |
C142c |
Handover 16116n133q |
Number of outgoing normal internal directed retry (towards a TCH channel in HR or FR usage) -successes. |
|
CC |
This measurement type provides a set of counters related to the Short Message Service Cell Broadcast.
Measurement Type 30 can be used in Permanent or On-Demand Measurement-Campaigns. It can be activated per BSS.
|
Type |
|
|
|
|
Meas. |
|
|
NB_SMS_CB_FAIL_IND |
CB603 |
Quality of Service |
Each time a FAILURE INDICATION sent to the CBC, number of cells implicated by the failure. |
BSC |
CC |
|
|
NB_SMS_CB_WRITE_REP_KILL_MESS_REJ |
CB604 |
Quality of Service |
Number of cells rejected for a WRITE REPLACE or KILL MESSAGE request. |
BSC |
CC |
|
|
NB_SMSCB_KILL_MESS_SUCC |
CB602 |
Traffic Load |
Number of cells successfully served for a KILL MESSAGE. |
BSC |
CC |
|
|
NB_SMSCB_WRITE_REPL_SUCC |
CB601 |
Traffic Load |
Number of cells successfully served for a WRITE REPLACE. |
BSC |
CC |
This measurement type provides a set of global counters providing an overview of each measurement type.
Measurement Type 110 can be used in Permanent or On-Demand Measurement-Campaigns. It can be activated per BSS.
|
Type |
|
|
|
|
Meas. |
|
|
AV_NB_A_TRAF_CHAN_BLOCK_OUT_OF_SERV |
MC35 |
Resource Availability & Usage |
Average number of A-traffic-channels (i.e. all A-channels except for N7, SPC and synchro) that are blocked or out of service. |
BSC |
SI (20s) |
|
|
AV_NB_AVAIL_A_TRAF_CHAN |
MC36 |
Resource Availability & Usage |
Average number of available A-traffic-channels channels (i.e. all A-channels except for N7, SPC and synchro). |
BSC |
SI (20s) |
|
|
AV_NB_AVAIL_CCCH |
MC27 |
Resource Availability & Usage |
Average number of available CCCH channels. |
|
SI (20s) |
|
|
AV_NB_AVAIL_SDCCH |
MC26 |
Resource Availability & Usage |
Average number of available SDCCH subchannels. |
|
SI (20s) |
|
|
AV_NB_AVAIL_TCH |
MC250 |
Resource Availability & Usage |
Average number of available TCH (in HR or FR usage) radio timeslot. |
|
SI (20s) |
|
|
AV_NB_BUSY_TCH |
MC28 |
Resource Availability & Usage |
Average number of busy TCH radio timeslot (in FR or HR usage). |
|
SI (10s) |
|
|
AV_NB_IDLE_TCH_INTERF_BAND1 |
MC320a |
Resource Availability & Usage |
Average number of idle TCH radio timeslot in FR or HR usage belonging to the interference band 1. |
|
SI (20s) |
|
|
AV_NB_IDLE_TCH_INTERF_BAND2 |
MC320b |
Resource Availability & Usage |
Average number of idle TCH radio timeslot in FR or HR usage belonging to the interference band 2. |
|
SI (20s) |
|
|
AV_NB_IDLE_TCH_INTERF_BAND3 |
MC320c |
Resource Availability & Usage |
Average number of idle TCH radio timeslot in FR or HR usage belonging to the interference band 3. |
|
SI (20s) |
|
|
AV_NB_IDLE_TCH_INTERF_BAND4 |
MC320d |
Resource Availability & Usage |
Average number of idle TCH radio timeslot in FR or HR usage belonging to the interference band 4. |
|
SI (20s) |
|
|
AV_NB_IDLE_TCH_INTERF_BAND5 |
MC320e |
Resource Availability & Usage |
Average number of idle TCH radio timeslot in FR or HR usage belonging to the interference band 5. |
|
SI (20s) |
|
|
AV_NB_NOT_AVAIL_TRX_TS |
MC24 |
Resource Availability & Usage |
Average
number of not available radio |
|
SI (20s) |
|
|
AV_NB_TCH_QUEUED |
MC141 |
Resource Availability & Usage |
Average number of queued TCH (in HR or FR usage) normal assignment or external handover -requests. |
|
SI (20s) |
|
|
NB_CELL_CHAN_REQD |
MC8c |
Traffic Load |
RACH load in the whole cell. MC8C= SUM (all TRX_TS of the cell) C8C (see type 3). |
|
CC |
|
|
NB_CELL_IMM_ASS_CMD |
MC8b |
Traffic Load |
AGCH load in the whole cell. MC8B= SUM (all TRX_TS of the Cell) C8B (see type 3) |
|
CC |
|
|
NB_CELL_IMM_ASS_REJ |
MC8d |
Traffic Load |
Number of rejected MS channel requests in the whole cell because no SDCCH can be allocated by the BSC due to congestion (number of 04.08IMMEDIATE ASSIGNMENT REJECT sent to the MS via the selected cell). MC8D= SUM (all TRX_TS of the cell) C8D (see type 3) |
|
CC |
|
|
NB_CELL_PAGING_CMD |
MC8a |
Traffic Load |
PCH load for the whole cell. MC8A= SUM (all TRX_TS of the Cell) C8A (see type 3) |
|
CC |
|
|
NB_DTAP_NOR_ASS_SUCC |
MC161 |
Quality of Service |
Number of normal assignment - DTAP successes (mobile originating + mobile terminating) MC161 = C161a + C161b (see type 1) |
|
CC |
|
|
NB_HO_12_TooLowPowBudg |
MC678 |
Handover 16116n133q |
Number of inter-cell internal or external handover -attempts, with cause 12: "too low power budget" on TCH (in FR or FR usage) or SDCCH channels. MC678=C478+C518 (defined in type 6 and 28) |
|
CC |
|
|
NB_HO_14_HighLevNeigLowCellSlowMS |
MC785f |
Handover 16116n133q |
Number of inter-cell internal or external handover -attempts, with cause 14: "high level in neighbour lower layer for slow mobile" on a TCH (in HR or FR usage) or SDCCH channel. This counter is related to micro cell environment. MC785f=C585f+C605f (see type 6 and 28). |
|
CC |
|
|
NB_HO_15_TooHighLevInterfUp |
MC676 |
Handover 16116n133q |
Number of intra-cell handover -attempts with cause 15: "too high level interference on uplink" for SDCCH and TCH handover. MC676=C476+C516 (see type 6 and 28). |
|
CC |
|
|
NB_HO_16_TooHighLevInterfDown |
MC677 |
Handover 16116n133q |
Number of intra-cell handover -attempts with cause 16: "too high level interference on downlink" for SDCCH and TCH handovers. MC677=C477+C517 (see type 6 and 28). |
|
CC |
|
|
NB_HO_17_TooLowLevUpMicroCell |
MC785d |
Handover 16116n133q |
Number of inter-cell internal or external handovers -attempts, with cause 17: "too low level on the uplink in a microcell compared to a high threshold" on a TCH (in HR or FR usage) or SDCCH channel. This counter is related to micro cell environment. MC785d=C585d+C605d (see type 6 and 28) |
|
CC |
|
|
NB_HO_18_TooLowLevDownMicroCell |
MC785e |
Handover 16116n133q |
Number of inter-cell internal or external handovers -attempts, with cause 18: "too low level on the downlink in a microcell compared to a high threshold" on a TCH (in HR or FR usage) or SDCCH channel. This counter is related to micro cell environment. MC785e=C585e+C605e (see type 6 and 28). |
|
CC |
|
|
NB_HO_2_TooLowQualUp |
MC670 |
Handover 16116n133q |
Number of inter-cell internal or external handover -attempts triggered with cause 2: "uplink quality too low" for SDCCH and TCH handovers. MC670=C470+C510 (see type 6 and 28). |
|
CC |
|
|
NB_HO_21_HighLevNeigCellPrefBand |
MC679 |
Handover 16116n133q |
Number of inter-cell internal or external handover -attempts with cause 21: "high level in neighbour cell in the preferred band" for SDCCH and TCH handovers. This counter is related to multiband. MC679=C479+C519 (see type 6 and 28). |
|
CC |
|
|
NB_HO_22_TooShortDistance |
MC1050 |
Handover 16116n133q |
Number of inter-cell internal or external handover -attempts with cause 22: "too short MS-BTS distance". This cause is restricted to the extended cells for SDCCH and TCH handovers. This counter counts also the directed retries. MC1050=C450+C454 (see type 6 and 28). |
|
CC |
|
|
NB_HO_3_TooLowLevUp |
MC671 |
Handover 16116n133q |
Number of inter-cell internal or external handover -attempts with cause 3: "uplink level too low" for SDCCH and TCH handovers. MC671=C471+C511 (see type 6 and 28). |
|
CC |
|
|
NB_HO_4_TooLowQualDown |
MC672 |
Handover 16116n133q |
Number of inter-cell internal or external handover -attempts with cause 4: "downlink quality too low" for SDCCH and TCH handovers. MC672=C472+C512 (see type 6 and 28). |
|
CC |
|
|
NB_HO_5_TooLowLevDown |
MC673 |
Handover 16116n133q |
Number of inter-cell internal or external handover -attempts triggered with cause 5: "downlink level too low" for SDCCH and TCH handovers. MC673=C473+C513 (see type 6 and 28). |
|
CC |
|
|
NB_HO_6_TooLongDistance |
MC674 |
Handover 16116n133q |
Number of SDCCH inter-cell internal or external handover -attempts with cause 6: "MS-BTS distance too long" for SDCCH and CH handovers. MC674=C474+C514 (see type 6 and 28). |
|
CC |
|
|
NB_HO_7_ConsBadSACCHmicroCell |
MC785a |
Handover 16116n133q |
Number of inter-cell internal or external handover -attempts, with cause 7: "several consecutive bad SACCH frames received in a micro cell" on a TCH (in HR or FR usage) or SDCCH channel. This counter is related to micro cell environment. MC785a=C585a+C605a (see type 6 and 28). |
|
CC |
|
|
NB_HO_ATPT_23_TrafHandover 16116n133q |
MC1040 |
Handover 16116n133q |
Number of inter-cell internal or external handover -attempts, with the cause 23: "traffic handover" on for SDCCH and TCH handovers. This counter counts also the directed retries. MC1040=C440+C445 (see type 6 and 28). |
|
CC |
|
|
NB_HO_ATPT_24_gencapture |
MC1044 |
Handover 16116n133q |
Number of inter-cell internal or external handover -attempts, with the cause 24: "general capture handover" for SDCCH and TCH handovers. This counter counts also the directed retries. MC1044=C444+C446 (see type 6 and 28). |
|
CC |
|
|
NB_HO_MSC_TRIG |
MC675 |
Handover 16116n133q |
Number of external handovers triggered by the MSC but not required by the BSS for SDCCH and TCH handovers. MC675=C75+C115 (see type 6 and 28). |
|
CC |
|
|
NB_IMM_ASS_ALLOC |
MC148 |
Traffic Load |
Number of immediate assignment plus SDCCH normal assignments for which SDCCH channel is allocated by the BSC. |
|
CC |
|
|
NB_IMM_ASS_EXEC_FAIL_RADIO |
MC149 |
Quality of Service |
Number of immediate assignment -execution failures due to MS access problem. |
|
CC |
|
|
NB_IMM_ASS_PREP_FAIL_CONG |
MC04 |
Quality of Service |
Number of immediate assignment -preparation failures due to congestion. |
|
CC |
|
|
NB_IMM_ASS_SUCC_MO |
MC02 |
Quality of Service |
Number of immediate assignment -successes for Mobile Originating procedure. Details are provided by C02a to C02h. |
|
CC |
|
|
NB_IMM_ASS_SUCC_MO_CALL_EST |
MC02h |
Quality of Service |
Number of immediate assignment -successes for Mobile Originating procedure, case: normal or emergency call establishment. |
|
CC |
|
|
NB_IMM_ASS_SUCC_MO_CM_REEST |
MC02e |
Quality of Service |
Number of immediate assignment -successes for Mobile Originating procedure, case: CM Re-establishment procedure. |
|
CC |
|
|
NB_IMM_ASS_SUCC_MO_FOLLOW_ON |
MC02d |
Quality of Service |
Number of immediate assignment -successes for Mobile Originating procedure, case: Location Update request ("follow on" procedure). |
|
CC |
|
|
NB_IMM_ASS_SUCC_MO_IMSI_DETACH |
MC02g |
Quality of Service |
Number of
immediate assignment -successes for Mobile |
|
CC |
|
|
NB_IMM_ASS_SUCC_MO_L3INFO_UNKNOW |
MC02f |
Quality of Service |
Number of
immediate assignment -successes for Mobile |
|
CC |
|
|
NB_IMM_ASS_SUCC_MO_LOC_UPD |
MC02a |
Quality of Service |
Number of immediate assignment -successes for Mobile Originating procedure, case: Location Update request (except the "follow on" procedure). |
|
CC |
|
|
NB_IMM_ASS_SUCC_MO_SMS |
MC02b |
Quality of Service |
Number of immediate assignment -successes for Mobile Originating procedure, case: SMS procedure on SDCCH. |
|
CC |
|
|
NB_IMM_ASS_SUCC_MO_SUP_SERV |
MC02c |
Quality of Service |
Number of immediate assignment -successes for Mobile Originating procedure, case: Supplementary Service. |
|
CC |
|
|
NB_IMM_ASS_SUCC_MT |
MC01 |
Quality of Service |
Number of immediate assignment plus SDCCH normal assignment -successes for Mobile Terminating procedure. |
|
CC |
|
|
NB_INC_EXT_HO_ATPT |
MC821 |
Handover 16116n133q |
Number of incoming external TCH (in HR or FR usage) and SDCCH handover -attempts. MC821=C221+C311 (see type 6 and 28) |
|
CC |
|
|
NB_INC_EXT_HO_EXEC_FAIL_MS_ACCESS |
MC643 |
Handover 16116n133q |
Number of incoming external TCH (in HR or FR usage) and SDCCH handover -execution failures due to MS access problem. MC643=C43+C83 (see type 6 and 28) |
|
CC |
|
|
NB_INC_EXT_HO_REQ |
MC820 |
Handover 16116n133q |
Number of incoming external TCH (in HR or FR usage) and SDCCH handover -requests. MC820=C220+C310 (see type 6 and 28) |
|
CC |
|
|
NB_INC_EXT_HO_SUCC |
MC642 |
Handover 16116n133q |
Number of incoming external TCH (in HR or FR usage) and SDCCH handover -successes. MC642=C42+C82 (see type 6 and 28) |
|
CC |
|
|
NB_INC_EXT_SDCCH_HO_PREP_FAIL_CONG |
MC81 |
Handover 16116n133q |
Number of incoming external SDCCH handover -preparation failures due to congestion. |
|
CC |
|
|
NB_INC_EXT_TCH_HO_PREP_FAIL |
MC41 |
Handover 16116n133q |
Number of incoming external TCH (in HR or FR usage) handover -preparation failures due to congestion (C41a), or A-traffic-channel status mismatch between the BSC and the MSC (C41b). |
|
CC |
|
|
NB_INC_EXT_TCH_HO_PREP_FAIL_CONG |
MC41a |
Handover 16116n133q |
Number of incoming external TCH (in HR or FR usage) handover -preparation failures due to congestion. |
|
CC |
|
|
NB_INC_EXT_TCH_HO_PREP_FAIL_NO_TTCH |
MC41b |
Handover 16116n133q |
Number of incoming external TCH (in HR or FR usage) handover -preparation failures due to A-traffic-channel status mismatch between the BSC and the MSC. |
|
CC |
|
|
NB_INC_EXT_TCH_HO_QUEUED |
MC13b |
Traffic Load |
Number of TCH (in HR or FR usage) incoming external handover -request that are put in BSC queue. |
|
CC |
|
|
NB_INC_IDR_ALLOC |
MC15a |
Traffic Load |
Number of incoming internal directed retry (towards a TCH channel in HR or FR usage) whose target channel is allocated by the BSC. |
|
CC |
|
|
NB_INC_IDR_PREP_FAIL_CONG |
MC155 |
Handover 16116n133q |
Number of incoming internal directed retry (forced or normal) -preparation failures due to congestion. The target TCH channel can be in HR or FR usage. |
|
CC |
|
|
NB_INC_IDR_REQ |
MC153 |
Handover 16116n133q |
Number of incoming internal directed retry (forced or normal) -requests. The target TCH channel can be in HR or FR usage. |
|
CC |
|
|
NB_INC_IDR_SUCC (1) |
MC17a |
Quality of Service |
Number of incoming directed retry (towards a TCH channel in HR or FR usage) -successes |
|
CC |
|
|
NB_INC_IDR_SUCC (29) |
MC151 |
Handover 16116n133q |
Number of incoming internal directed retry (forced or normal, towards a TCH channel in HR or FR usage) -successes. |
|
CC |
|
|
NB_INC_INT_HO_ATPT |
MC831 |
Handover 16116n133q |
Number of incoming internal inter cell TCH (in HR or FR usage) and SDCCH handover -attempts. MC831=C231+C331 (see type 6 and 28). |
|
CC |
|
|
NB_INC_INT_HO_EXEC_FAIL_MS_ACCESS |
MC653 |
Handover 16116n133q |
Number of incoming internal inter-cell TCH (in HR or FR usage) and SDCCH handover -execution failures due to MS access problem; the mobile may reverts or not to the old channel. MC653=C53+C93 (see type 6 and 28). |
|
CC |
|
|
NB_INC_INT_HO_REQ |
MC830 |
Handover 16116n133q |
Number of incoming internal inter cell TCH (in HR or FR usage) and SDCCH handover -requests. MC830=C230+C330 (see type 6 and 28). |
|
CC |
|
|
NB_INC_INT_HO_SUCC |
MC652 |
Handover 16116n133q |
Number of incoming internal inter-cell TCH (in HR or FR usage) and SDCCH handover -successes. MC652=C52+C92 (see type 6 and 28). |
|
CC |
|
|
NB_INC_INT_SDCCH_HO_PREP_FAIL_CONG |
MC91 |
Handover 16116n133q |
Number of incoming internal inter-cell SDCCH handover -preparation failures due to congestion. |
|
CC |
|
|
NB_INC_INT_TCH_HO_PREP_FAIL_CONG |
MC51 |
Handover 16116n133q |
Number of incoming internal inter-cell TCH (in HR or FR usage) handover -preparation failures due to congestion. |
|
CC |
|
|
NB_INC_SDCCH_HO_ALLOC |
MC147 |
Traffic Load |
Number of incoming internal or external SDCCH handovers -whose target SDCCH channel is allocated by the BSC. |
|
CC |
|
|
NB_INC_SDCCH_HO_SUCC |
MC10 |
Quality of Service |
Number of incoming SDCCH handover (any kind) -successes. |
|
CC |
|
|
NB_INC_TCH_HO_ALLOC |
MC15b |
Traffic Load |
Number of incoming TCH (in HR or FR usage) handover (internal or external) whose target channel is allocated by the BSC. The external directed retries are also counted by this counter. |
|
CC |
|
|
NB_INC_TCH_HO_SUCC |
MC17b |
Quality of Service |
Number of incoming internal and external TCH (in HR or FR usage) handover -successes. The external directed retries are also counted by this counter. |
|
CC |
|
|
NB_INTRA_HO_ATPT |
MC871 |
Handover 16116n133q |
Number of intra cell TCH (in HR or FR usage) and SDCCH handover -attempts.MC871=C271+C361 (see type 6 and 28). |
|
CC |
|
|
NB_INTRA_HO_EXEC_FAIL_NO_REV |
MC663 |
Handover 16116n133q |
Number of intra-cell TCH (in HR or FR usage) and SDCCH handover -execution failures due MS access problem; the mobile is lost. MC663=C63+C103 (see type 6 and 28). |
|
CC |
|
|
NB_INTRA_HO_EXEC_FAIL_REV |
MC667 |
Handover 16116n133q |
Number of intra-cell TCH (in HR or FR usage) and SDCCH handover -execution failures due to MS access problem with reversion of the mobile to the old channel. MC667=C67+C107 (see type 6 and 28). |
|
CC |
|
|
NB_INTRA_HO_REQ |
MC870 |
Handover 16116n133q |
Number of intra cell TCH (in HR or FR usage) and SDCCH handover -requests. MC870=C270+C360 (see type 6 and 28). |
|
CC |
|
|
NB_INTRA_HO_SUCC |
MC662 |
Handover 16116n133q |
Number of intra-cell TCH (in HR or FR usage) and SDCCH handover -successes. MC662=C62+C102 (see type 6 and 28) |
|
CC |
|
|
NB_INTRA_SDCCH_HO_PREP_FAIL_CONG |
MC101 |
Handover 16116n133q |
Number of intra-cell SDCCH handover -preparation failures due to congestion. |
|
CC |
|
|
NB_INTRA_TCH_HO_PREP_FAIL_CONG |
MC61 |
Handover 16116n133q |
Number of intra-cell TCH (in HR or FR usage) handover -preparation failures due to congestion. |
|
CC |
|
|
NB_MAX_SIMUL_BUSY_SDCCH |
MC31 |
Resource Availability & Usage |
Maximum number of simultaneously busy SDCCH subchannels. |
|
CC |
|
|
NB_MAX_SIMUL_BUSY_TCH |
MC29 |
Resource Availability & Usage |
Maximum number of simultaneously busy TCH radio timeslots in HR or FR usage. |
|
CC |
|
|
NB_MULTIBAND_MS_ACCESS_EXCEPT_LU |
MC150a |
Traffic Load |
Number of initial accesses for call establishments (location update apart) of mobiles able to handle multiband. |
|
CC |
|
|
NB_N7_CON_CONF |
MC351 |
Traffic Load |
MC351=C255+C256 |
N7
SL |
CC |
|
|
NB_N7_CON_REQ |
MC350 |
Traffic Load |
Number of CONNECTION REQUEST received from and sent to the MSC. MC350=C253+C254 (see type 25) |
N7
SL |
CC |
|
|
NB_OUT_EDR_REQ |
MC144f |
Traffic Load |
Number of outgoing external directed retry (forced and normal) -requests. The target TCH channel can be in HR or FR usage. MC144f=C144b+C144d (see type 29). |
|
CC |
|
|
NB_OUT_EDR_SUCC |
MC142f |
Quality of Service |
Number of outgoing external directed retry (forced and normal towards a TCH channel in HR or FR usage) -successes. MC142f=C142b+C142d (see type 29). |
|
CC |
|
|
NB_OUT_EXT_HO_ATPT |
MC650 |
Handover 16116n133q |
Number of outgoing external TCH (in HR or FR usage) and SDCCH handover -attempts. MC650=C50+C90 (see type 6 and 28). |
|
CC |
|
|
NB_OUT_EXT_HO_EXEC_FAIL_NO_REV |
MC648 |
Handover 16116n133q |
Number of outgoing external TCH (in HR or FR usage) and SDCCH handover -execution failures due to MS access problem without reversion of the mobile to the old channel (call drop). MC648=C48+C88 (see type 6 and 28). |
|
CC |
|
|
NB_OUT_EXT_HO_EXEC_FAIL_REV |
MC647 |
Handover 16116n133q |
Number of outgoing external TCH (in HR or FR usage) and SDCCH handover -execution failures due to MS access problem with reversion of the mobile to the old channel. MC647=C47+C87 (see type 6 and 28). |
|
CC |
|
|
NB_OUT_EXT_HO_REQ |
MC645 |
Handover 16116n133q |
Number of outgoing external TCH (in HR or FR usage) and SDCCH handover -requests. MC645=C45+C85 (see type 6 and 28). |
|
CC |
|
|
NB_OUT_EXT_HO_SUCC |
MC646 |
Handover 16116n133q |
Number of outgoing external TCH (in HR or FR usage) and SDCCH handover -successes. MC646=C46+C86 (see type 6 and 28). |
|
CC |
|
|
NB_OUT_IDR_REQ |
MC144e |
Traffic Load |
Number of outgoing forced and normal internal directed retry -requests. The target TCH channel can be in HR or FR usage. MC144e=C144a+C144c (see type 29). |
|
CC |
|
|
NB_OUT_IDR_SUCC |
MC142e |
Quality of Service |
Number of outgoing forced and normal internal directed retry (towards a TCH channel in HR or FR usage) -successes. MC142e=C142a+C142c (see type 29). |
|
CC |
|
|
NB_OUT_INT_HO_ATPT |
MC660 |
Handover 16116n133q |
Number of outgoing internal inter-cell TCH (in HR or FR usage) and SDCCH handover -attempts. MC660=C60+C100 (see type 6 and 28). |
|
CC |
|
|
NB_OUT_INT_HO_EXEC_FAIL_NO_REV |
MC658 |
Handover 16116n133q |
Number of outgoing internal inter-cell TCH (in HR or FR usage) and SDCCH handover -execution failures due to MS access problem without reversion of the mobile to the old channel (call drop). MC658=C58+C98 (see type 6 and 28). |
|
CC |
|
|
NB_OUT_INT_HO_EXEC_FAIL_REV |
MC657 |
Handover 16116n133q |
Number of outgoing internal inter-cell TCH (in HR or FR usage) and SDCCH handover -execution failures due to MS access problem with reversion of the mobile to the old channel. MC657=C57+C97 (see type 6 and 28). |
|
CC |
|
|
NB_OUT_INT_HO_REQ |
MC655a |
Handover 16116n133q |
Number of outgoing internal inter-cell TCH (in HR or FR usage) and SDCCH handover -requests. MC655=C55+C95 (see type 6 and 28). |
|
CC |
|
|
NB_OUT_INT_HO_SUCC |
MC656 |
Handover 16116n133q |
Number of outgoing internal inter-cell TCH (in HR or FR usage) and SDCCH handover -successes. MC656=C56+C96 (see type 6 and 28). |
|
CC |
|
|
NB_OUT_SDCCH_HO_SUCC |
MC03 |
Quality of Service |
Number of outgoing SDCCH handover (any kind) -successes. |
|
CC |
|
|
NB_OUT_TCH_HO_SUCC |
MC20 |
Quality of Service |
Number of outgoing TCH (in HR or FR usage) handover (internal or external) -successes. |
|
CC |
|
|
NB_SDCCH_DROP_EST_PHAS_BSS_PB |
MC137 |
Quality of Service |
Number of SDCCH drops in SDCCH established phase due to BSS problem. |
|
CC |
|
|
NB_SDCCH_DROP_EST_PHAS_RLF |
MC138 |
Quality of Service |
Number of
SDCCH drops on SDCCH established phase due to radio link failure (radio link
timeout or |
|
CC |
|
|
NB_SDCCH_DROP_OUT_HO |
MC07 |
Quality of Service |
Number of SDCCH drops during any outgoing SDCCH handover. |
|
CC |
|
|
NB_SDCCH_HO_20_HighLevNeigCellForcDR |
MC607 |
Handover 16116n133q |
Number of SDCCH inter-cell internal or external handover -attempts with cause 20: "forced directed retry". This counter is related to a forced directed retry (internal or external). |
|
CC |
|
|
NB_SMS_PP_CON_FAIL |
MC197 |
Quality of Service |
Number of failed SMS connection (rejections and releases). MC197=C194a+C194b+C194c+C195 (see type 19). |
|
CC |
|
|
NB_SMS_PP_CON_SUCC |
MC196 |
Quality of Service |
Number of SMS connections (Mobile Originating and Mobile Terminating on SDCCH or SACCH). MC196=C190+C191+C192+C193 (see type 19) |
|
CC |
|
|
NB_TCH_DROP_DTAP_EST_PHAS |
MC162 |
Quality of Service |
Number of TCH (in HR or FR usage) drops in TCH DTAP established phase (any cause). MC162 = C162a + C162b + C162c (see type 1) |
|
CC |
|
|
NB_TCH_DROP_EST_PHAS_BSS_PB |
MC14c |
Quality of Service |
Number of TCH (in HR or FR usage) drops in TCH established phase due to BSS problem. |
|
CC |
|
|
NB_TCH_DROP_EST_PHAS_REM_TRANS_FAIL |
MC139 |
Quality of Service |
Number of TCH (in HR or FR usage) drops in TCH established phase due to remote transcoder failure. This counter is not concerned by the channel change procedure. |
|
CC |
|
|
NB_TCH_DROP_EST_PHAS_RLF |
MC136 |
Quality of Service |
Number of TCH
(in HR or FR usage) drops in TCH established phase due to radio link failure
(radio link timeout or |
|
CC |
|
|
NB_TCH_DROP_HO_PREP_EXEC_FAIL_BSS_PB |
MC14a |
Quality of Service |
Number of TCH (in HR or FR usage) drops due to BSS problem during any TCH handover preparation and execution phases. |
|
CC |
|
|
NB_TCH_DROP_OUT_HO_EXEC |
MC21 |
Quality of Service |
Number of TCH drops during the execution of any TCH outgoing handover. |
|
CC |
|
|
NB_TCH_HO_ATPT_10_TooLowLevUpInZone |
MC586a |
Handover 16116n133q |
Number of intra-cell handover -attempts, with cause 10 "Inner zone uplink level too low" on TCH channel (in HR or FR usage). This counter is related to concentric cell environment. |
|
CC |
|
|
NB_TCH_HO_ATPT_11_TooLowLevDownInZone |
MC586b |
Handover 16116n133q |
Number of intra-cell handover -attempts, with cause 11: "Inner zone downlink level too low" on TCH channel (in HR or FR usage). This counter is related to concentric cell environment. |
|
CC |
|
|
NB_TCH_HO_ATPT_13_TooHighLevUpDownOutZone |
MC586c |
Handover 16116n133q |
Number of intra-cell handover -attempts, with cause 13: "Outer zone uplink and downlink levels too high" on TCH channel (in HR or FR usage). This counter is related to concentric cell environment. |
|
CC |
|
|
NB_TCH_NOR_ASS_ALLOC |
MC16 |
Traffic Load |
Number of TCH (in HR or FR usage) normal assignment -whose TCH channel is allocated in the BSC. |
|
CC |
|
|
NB_TCH_NOR_ASS_EXEC_FAIL_RADIO |
MC146b |
Quality of Service |
Number of TCH (in HR or FR usage) normal assignment -execution failures due to MS access problem. |
|
CC |
|
|
NB_TCH_NOR_ASS_HO_EST_PHAS_FAIL_BSS_PB |
MC14 |
Quality of Service |
Number of TCH failures due to BSS problem. Details are provided by C14a/b/c. |
|
CC |
|
|
NB_TCH_NOR_ASS_HO_PREP_FAIL_ACHAN_MIS (110) |
MC19 |
Quality of Service |
Number of TCH (in HR or FR usage) normal assignment and external handover -preparation failures due to A-channel status mismatch between the BSC and the MSC. |
BSC |
CC |
|
|
NB_TCH_NOR_ASS_PREP_EXEC_FAIL_BSS_PB |
MC14b |
Quality of Service |
Number of TCH (in HR or FR usage) drops during normal assignment preparation and execution phases due to BSS problem. |
|
CC |
|
|
NB_TCH_NOR_ASS_PREP_FAIL_CONG |
MC612 |
Quality of Service |
Number of TCH (in HR or FR usage) normal assignment -preparation failures due to congestion. Details are given by counters C612a/b/c/d. |
|
CC |
|
|
NB_TCH_NOR_ASS_PREP_FAIL_NO_QUEUE |
MC612a |
Quality of Service |
Number of TCH (in HR or FR usage) normal assignment -preparation failures due to congestion because queuing is not permitted. |
|
CC |
|
|
NB_TCH_NOR_ASS_PREP_FAIL_QUEUE_FULL |
MC612b |
Quality of Service |
Number of TCH (in HR or FR usage) normal assignment -preparation failures due to congestion because the queue is full and there are no request of lowest priority to dequeue. |
|
CC |
|
|
NB_TCH_NOR_ASS_PREP_FAIL_QUEUE_REJ |
MC612d |
Quality of Service |
Number of TCH (in HR or FR usage) normal assignment -preparation failures due to congestion because the request is in a first time queued, but then rejected because dequeued by a higher priority request. |
|
CC |
|
|
NB_TCH_NOR_ASS_PREP_FAIL_T11_EXP |
MC612c |
Quality of Service |
Number of TCH (in HR or FR usage) normal assignment -preparation failures due to congestion because the request is in a first time queued, but then rejected because no free TCH can be found before timer expiry. |
|
CC |
|
|
NB_TCH_NOR_ASS_QUEUED |
MC13a |
Traffic Load |
Number of TCH (in HR or FR usage) normal assignment -requests that are put in BSC queue. |
|
CC |
|
|
NB_TCH_NOR_ASS_SUCC |
MC18 |
Quality of Service |
Number of TCH (in HR or FR usage) normal assignment -successes. |
|
CC |
|
|
NB_TIMES_SDCCH_BUSY (110) |
MC390 |
Resource Availability & Usage |
Number of times the SDCCH subchannels belonging to the TRX are busy. MC390=SUM(all TRX_TS of the TRX) C39 (see type 4). |
TRX |
CC |
|
|
NB_TRX_FR_ALLOC |
MC370a |
Resource Availability & Usage |
Number of times the TCH radio timeslots belonging to the TRX are allocated in FR usage, for normal assignment or handover. MC370A= SUM(all TRX_TS of the TRX) (C370A) (see type 5). |
TRX |
CC |
|
|
NB_TRX_HR_ALLOC |
MC370b |
Resource Availability & Usage |
Number of times the TCH radio timeslots belonging to the TRX are allocated in HR usage (i.e. the upper or lower HR subchannel of the radio timeslot is allocated), for normal assignment or handover. MC370B= SUM(all TRX_TS of the TRX) (C370B) |
TRX |
CC |
|
|
TIME_ALL_AVAIL_SDCCH_BUSY |
MC80 |
Resource Availability & Usage |
Cumulated time (in seconds) during which all available SDCCH subchannels are busy. |
|
CC |
|
|
TIME_ALL_AVAIL_TRX_TS_BUSY |
MC34 |
Resource Availability & Usage |
Cumulated time (in seconds) during which all available radio timeslots (TRX_TS) of the cell are busy. |
|
CC |
|
|
TIME_N7_ALIGNED |
MN1.1 |
Resource Availability & Usage |
Time (in seconds) during which the N7 SL is correctly aligned. |
N7 Sign. Link |
CC |
|
|
TIME_N7_NOT_ALIGNED |
MN2.1 |
Resource Availability & Usage |
Time (in
seconds) during which the N7 SL |
N7 Sign. Link |
CC |
|
|
TIME_TRX_FR_BUSY |
MC380a |
Traffic Load |
Time (in seconds) during which the TCH radio timeslot in FR usage is busy |
TRX |
CC |
|
|
TIME_TRX_HR_BUSY |
MC380b |
Traffic Load |
Time (in seconds) during which the TCH radio timeslot in HR usage is busy |
TRX |
CC |
|
|
TIME_TRX_SDCCH_BUSY |
MC400 |
Traffic Load |
Cumulated time during which the SDCCH subchannels belonging to the TRX are busy. MC400= SUM (all TRX_TS of the TRX) C40 (see type 4) |
TRX |
CC |
|
|
TIME_TRX_TCH_BUSY_BY_MULTIBAND_MS |
MC381 |
Traffic Load |
Time (in seconds) during which the TCH radio timeslots (in FR or HR usage) are busy by a multiband mobile on the TRX. MC381= SUM (all TRX_TS of the TRX) (C381A+C381B). |
TRX |
CC |
This measurement type provides a set of handover counters provided per handover adjacency: variable serving cell - variable target cell. Handover 16116n133q information per identified couple of serving and target cell is provided. The cells are identified by LAC and CI.
Measurement Type 180 can be used in Permanent or On-Demand Measurement-Campaigns. It can be activated per BSS (counters reported per cell).
|
Type |
|
|
|
|
Meas. |
|
|
NB_ADJ_BSC_INC_HO_ATPT |
C401 |
Adjacency |
Number of incoming external or internal inter cell SDCCH or TCH (in HR or FR usage) handover -attempts. The internal and external directed retries are counted. |
|
CC |
|
|
NB_ADJ_BSC_INC_HO_REQ |
C400 |
Adjacency |
Number of incoming external or internal inter-cell SDCCH or TCH (in HR or FR usage) handover -requests. The internal and external directed retries are counted. |
|
CC |
|
|
NB_ADJ_BSC_INC_HO_SUCC |
C402 |
Adjacency |
Number of incoming external or internal inter cell SDCCH or TCH (in HR or FR usage) handover -successes. The internal and external directed retries are counted. |
|
CC |
Observation measurements provide reports on DescreteDiscrete
Event Registration counters. The observation measurements are dedicated to very
detailed system behaviour analysis. They create a very high load for the system
and thus can be activated only on a limited number of cells at the same time.
These counters are grouped in Measurement Types, each dedicated to particular system procedure. Each Observation Measurement Type can be activated in the frame of a on-demand measurement campaign for a set of network elements. The counters are implemented in the BSC.
This measurement type provides detailed observation reports on the behaviour of used SDCCH channels. An observation is composed of a set of records, each record being related to a single channel seizure within the observed cell.
Type 10 can be used in On-Demand Measurement-Campaigns. It can be activated on a limited number of cells.
|
Type |
|
|
|
|
|
BS_POWER |
S07 |
Indicates the last commanded BS Power Level to the encoder. | ||
|
CHAN_RELEASE_TIME |
S03 |
The Absolute Date and Time at which the SDCCH Sub-channel was released. | ||
|
CHAN_SEIZ_TIME |
S02 |
The Absolute Date and Time at which the SDCCH Sub-channel was activated. | ||
|
CHANNEL_ID (SCCH) |
S01 |
The SDCCH sub-channel identity to which the observation relates, including BTS number, sector number, TRX number, TRX timeslot and sub-channel. | ||
|
END_INDICATION (SDCCH) |
S04 |
Describes how the SDCCH sub-channel was released (e.g. successful, LAPD failure, other BSS problems, radio failures, MS access problems). | ||
|
MS_POWER |
S06 |
Indicates the last commanded MS Power Level on the SACCH Channel to the Mobile. | ||
|
NB_ERRONEOUS_FRAMES_SENT |
S19 |
Indicates the number of erroneous frames that were received. | ||
|
NB_FRAMES_NOT_REPEATED |
S09 |
Indicates the number of SAPI 0 frames that were not repeated. | ||
|
NB_FRAMES_REPEATED |
S16 |
Indicates the number of SAPI 0 frames that were repeated at least once. | ||
|
NB_MS_TX_PWR_MAX_SENT |
S22 |
This counter indicates the number of 08.58 CONNECTION FAILURE INDICATION messages that were sent to the BSS with a cause value of "set YY_TXPWR_M". | ||
|
NB_PHYSICAL_INFO_SENT |
S18 |
Indicates the number of times 04.08 PHYSICAL INFORMATION message has been sent in case of asynchronous handover. | ||
|
NB_REJ_FRAMES_RECEIVED |
S21 |
Indicates the number of Reject (REJ) frames that were received. | ||
|
NB_REJ_FRAMES_SENT |
S20 |
Indicates the number of Reject (REJ) frames that were transmitted. | ||
|
NB_SABM_AFTER_UA_SENT |
S17 |
Indicates the number of SABM received on SAPI 0 when UA has already been sent (i.e. SABM received in established or timer recovery state). | ||
|
PERC_INCOR_SACCH_FRAMES_REC |
S24 |
Indicates the percentage of SACCH frames that could not be decoded. | ||
|
PERC_INCOR_SDCCH_FRAMES_REC |
S25 |
Indicates the percentage of SDCCH frames that could not be decoded. | ||
|
RADIO_LINK_FAILURE_INDICATION |
S23 |
Indicates whether or not a Radio Link Failure was detected or not. | ||
|
SAMPLE_RATE |
S26 |
Indicates the sample rate value at the time the observation is collected. | ||
|
SEIZURE_TYPE (SDCCH) |
S05 |
Describes the purpose for which the SDCCH sub-channel was seized . | ||
|
TIMING_ADVANCE |
S08 |
Indicates the last commanded Timing Advance on the SACCH Channel to the Mobile. |
This measurement type provides detailed observations on the 08.58MEASUREMENT REPORTS for a TCH (in HR or FR usage) channel. An observation is composed of a set of records, each record being related to a single channel seizure within the observed cell.
Measurement Type 11 can be used in On-Demand Measurement-Campaigns. It can be activated on one cell.
|
Type |
|
|
|
|
|
AV_RANGE_HO (11) |
R09 |
Indicates the average | ||
|
AV_RXLEV_DL_HO (11) |
R05 |
Indicates the average receive downlink level of the serving cell, as used by the handover algorithm. | ||
|
AV_RXLEV_DL_MCHO (11) |
R05a |
Indicates the average receive downlink level of the serving cell, as used by the handover algorithm (related to microcellular environment). | ||
|
AV_RXLEV_NCELL |
R1715 |
The average receive level of a neighboring cell as seen by the Mobile. | ||
|
AV_RXLEV_NCELL |
R1115 |
The average receive level of a neighboring cell as seen by the Mobile. | ||
|
AV_RXLEV_NCELL |
R3015 |
The average receive level of a neighboring cell as seen by the Mobile. | ||
|
AV_RXLEV_NCELL |
R515 |
The average receive level of a neighboring cell as seen by the Mobile. | ||
|
AV_RXLEV_NCELL |
R1615 |
The average receive level of a neighboring cell as seen by the Mobile. | ||
|
AV_RXLEV_NCELL |
R1815 |
The average receive level of a neighboring cell as seen by the Mobile. | ||
|
AV_RXLEV_NCELL |
R915 |
The average receive level of a neighboring cell as seen by the Mobile. | ||
|
AV_RXLEV_NCELL |
R415 |
The average receive level of a neighboring cell as seen by the Mobile. | ||
|
AV_RXLEV_NCELL |
R2615 |
The average receive level of a neighboring cell as seen by the Mobile. | ||
|
AV_RXLEV_NCELL |
R715 |
The average receive level of a neighboring cell as seen by the Mobile. | ||
|
AV_RXLEV_NCELL |
R1515 |
The average receive level of a neighboring cell as seen by the Mobile. | ||
|
AV_RXLEV_NCELL |
R815 |
The average receive level of a neighboring cell as seen by the Mobile. | ||
|
AV_RXLEV_NCELL |
R2915 |
The average receive level of a neighboring cell as seen by the Mobile. | ||
|
AV_RXLEV_NCELL |
R1415 |
The average receive level of a neighboring cell as seen by the Mobile. | ||
|
AV_RXLEV_NCELL |
R1315 |
The average receive level of a neighboring cell as seen by the Mobile. | ||
|
AV_RXLEV_NCELL |
R1015 |
The average receive level of a neighboring cell as seen by the Mobile. | ||
|
AV_RXLEV_NCELL |
R1215 |
The average receive level of a neighboring cell as seen by the Mobile. | ||
|
AV_RXLEV_NCELL |
R1915 |
The average receive level of a neighboring cell as seen by the Mobile. | ||
|
AV_RXLEV_NCELL |
R2715 |
The average receive level of a neighboring cell as seen by the Mobile. | ||
|
AV_RXLEV_NCELL |
R2115 |
The average receive level of a neighboring cell as seen by the Mobile. | ||
|
AV_RXLEV_NCELL |
R2815 |
The average receive level of a neighboring cell as seen by the Mobile. | ||
|
AV_RXLEV_NCELL |
R615 |
The average receive level of a neighboring cell as seen by the Mobile. | ||
|
AV_RXLEV_NCELL |
R315 |
The average receive level of a neighboring cell as seen by the Mobile. | ||
|
AV_RXLEV_NCELL |
R2315 |
The average receive level of a neighboring cell as seen by the Mobile. | ||
|
AV_RXLEV_NCELL |
R115 |
The average receive level of a neighboring cell as seen by the Mobile. | ||
|
AV_RXLEV_NCELL |
R2215 |
The average receive level of a neighboring cell as seen by the Mobile. | ||
|
AV_RXLEV_NCELL |
R3215 |
The average receive level of a neighboring cell as seen by the Mobile. | ||
|
AV_RXLEV_NCELL |
R2515 |
The average receive level of a neighboring cell as seen by the Mobile. | ||
|
AV_RXLEV_NCELL |
R215 |
The average receive level of a neighboring cell as seen by the Mobile. | ||
|
AV_RXLEV_NCELL |
R3115 |
The average receive level of a neighboring cell as seen by the Mobile. | ||
|
AV_RXLEV_NCELL |
R2015 |
The average receive level of a neighboring cell as seen by the Mobile. | ||
|
AV_RXLEV_NCELL |
R2415 |
The average receive level of a neighboring cell as seen by the Mobile. | ||
|
AV_RXLEV_PBGT_HO (11) |
R06 |
Indicates the average received Downlink Level of the serving cell, as used by the Power Budget algorithm. | ||
|
AV_RXLEV_UL_HO (11) |
R04 |
Indicates the average receive uplink level of the serving cell, as used by the handover algorithm. | ||
|
AV_RXLEV_UL_MCHO (11) |
R04a |
Indicates the average receive uplink level of the serving cell, as used by the handover algorithm (related to microcellular environment). | ||
|
AV_RXQUAL_DL_HO (11) |
R08 |
Indicates the average receive downlink quality of the serving cell, as used by the handover algorithm. | ||
|
AV_RXQUAL_UL_HO (11) |
R07 |
Indicates the average receive uplink quality of the serving cell, as used by the handover algorithm. | ||
|
BCCH_FREQ |
R2814 |
The Absolute BCCH Radio Frequency Number of a neighboring cell. | ||
|
BCCH_FREQ |
R1414 |
The Absolute BCCH Radio Frequency Number of a neighboring cell. | ||
|
BCCH_FREQ |
R1214 |
The Absolute BCCH Radio Frequency Number of a neighboring cell. | ||
|
BCCH_FREQ |
R1314 |
The Absolute BCCH Radio Frequency Number of a neighboring cell. | ||
|
BCCH_FREQ |
R1514 |
The Absolute BCCH Radio Frequency Number of a neighboring cell. | ||
|
BCCH_FREQ |
R2714 |
The Absolute BCCH Radio Frequency Number of a neighboring cell. | ||
|
BCCH_FREQ |
R1614 |
The Absolute BCCH Radio Frequency Number of a neighboring cell. | ||
|
BCCH_FREQ |
R2214 |
The Absolute BCCH Radio Frequency Number of a neighboring cell. | ||
|
BCCH_FREQ |
R1714 |
The Absolute BCCH Radio Frequency Number of a neighboring cell. | ||
|
BCCH_FREQ |
R2514 |
The Absolute BCCH Radio Frequency Number of a neighboring cell. | ||
|
BCCH_FREQ |
R2114 |
The Absolute BCCH Radio Frequency Number of a neighboring cell. | ||
|
BCCH_FREQ |
R1814 |
The Absolute BCCH Radio Frequency Number of a neighboring cell. | ||
|
BCCH_FREQ |
R2614 |
The Absolute BCCH Radio Frequency Number of a neighboring cell. | ||
|
BCCH_FREQ |
R1914 |
The Absolute BCCH Radio Frequency Number of a neighboring cell. | ||
|
BCCH_FREQ |
R2014 |
The Absolute BCCH Radio Frequency Number of a neighboring cell. | ||
|
BCCH_FREQ |
R2314 |
The Absolute BCCH Radio Frequency Number of a neighboring cell. | ||
|
BCCH_FREQ |
R814 |
The Absolute BCCH Radio Frequency Number of a neighboring cell. | ||
|
BCCH_FREQ |
R414 |
The Absolute BCCH Radio Frequency Number of a neighboring cell. | ||
|
BCCH_FREQ |
R314 |
The Absolute BCCH Radio Frequency Number of a neighboring cell. | ||
|
BCCH_FREQ |
R514 |
The Absolute BCCH Radio Frequency Number of a neighboring cell. | ||
|
BCCH_FREQ |
R614 |
The Absolute BCCH Radio Frequency Number of a neighboring cell. | ||
|
BCCH_FREQ |
R3014 |
The Absolute BCCH Radio Frequency Number of a neighboring cell. | ||
|
BCCH_FREQ |
R214 |
The Absolute BCCH Radio Frequency Number of a neighboring cell. | ||
|
BCCH_FREQ |
R714 |
The Absolute BCCH Radio Frequency Number of a neighboring cell. | ||
|
BCCH_FREQ |
R3114 |
The Absolute BCCH Radio Frequency Number of a neighboring cell. | ||
|
BCCH_FREQ |
R114 |
The Absolute BCCH Radio Frequency Number of a neighboring cell. | ||
|
BCCH_FREQ |
R1114 |
The Absolute BCCH Radio Frequency Number of a neighboring cell. | ||
|
BCCH_FREQ |
R2914 |
The Absolute BCCH Radio Frequency Number of a neighboring cell. | ||
|
BCCH_FREQ |
R2414 |
The Absolute BCCH Radio Frequency Number of a neighboring cell. | ||
|
BCCH_FREQ |
R3214 |
The Absolute BCCH Radio Frequency Number of a neighboring cell. | ||
|
BCCH_FREQ |
R914 |
The Absolute BCCH Radio Frequency Number of a neighboring cell. | ||
|
BCCH_FREQ |
R1014 |
The Absolute BCCH Radio Frequency Number of a neighboring cell. | ||
|
BS_TXPWR |
R11 |
Transmit power at the BTS. | ||
|
BSIC |
R2613 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
R2013 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
R2413 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
R3213 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
R2113 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
R2313 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
R213 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
R2513 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
R1813 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
R2213 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
R113 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
R313 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
R3013 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
R1113 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
R2913 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
R1313 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
R1013 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
R2813 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
R1413 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
R913 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
R3113 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
R813 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
R413 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
R1613 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
R713 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
R2713 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
R1713 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
R1213 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
R513 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
R613 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
R1913 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
R1513 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BTSNUM |
R12 |
Indicates the number of neighboring cells for which measurements made by the Mobile are available during the averaging interval. Measurements of up to 32 Neighboring cells can be provided. | ||
|
CHANNEL_ID (TCH) |
R01 |
The RTCH channel identity to which the Observation relates, including BTS Number, Sector Number, TRX Number, TRX Timeslot and Sub-channel which is only significant in case of an half rate TCH channel. | ||
|
MS_TXPWR |
R10 |
Transmit power at the Mobile. | ||
|
PBGT |
R216 |
The Power Budget evaluation of reception of a neighboring cell related to the serving cell. | ||
|
PBGT |
R1016 |
The Power Budget evaluation of reception of a neighboring cell related to the serving cell. | ||
|
PBGT |
R916 |
The Power Budget evaluation of reception of a neighboring cell related to the serving cell. | ||
|
PBGT |
R2916 |
The Power Budget evaluation of reception of a neighboring cell related to the serving cell. | ||
|
PBGT |
R616 |
The Power Budget evaluation of reception of a neighboring cell related to the serving cell. | ||
|
PBGT |
R516 |
The Power Budget evaluation of reception of a neighboring cell related to the serving cell. | ||
|
PBGT |
R3016 |
The Power Budget evaluation of reception of a neighboring cell related to the serving cell. | ||
|
PBGT |
R2816 |
The Power Budget evaluation of reception of a neighboring cell related to the serving cell. | ||
|
PBGT |
R316 |
The Power Budget evaluation of reception of a neighboring cell related to the serving cell. | ||
|
PBGT |
R816 |
The Power Budget evaluation of reception of a neighboring cell related to the serving cell. | ||
|
PBGT |
R3116 |
The Power Budget evaluation of reception of a neighboring cell related to the serving cell. | ||
|
PBGT |
R116 |
The Power Budget evaluation of reception of a neighboring cell related to the serving cell. | ||
|
PBGT |
R3216 |
The Power Budget evaluation of reception of a neighboring cell related to the serving cell. | ||
|
PBGT |
R2316 |
The Power Budget evaluation of reception of a neighboring cell related to the serving cell. | ||
|
PBGT |
R416 |
The Power Budget evaluation of reception of a neighboring cell related to the serving cell. | ||
|
PBGT |
R1916 |
The Power Budget evaluation of reception of a neighboring cell related to the serving cell. | ||
|
PBGT |
R2416 |
The Power Budget evaluation of reception of a neighboring cell related to the serving cell. | ||
|
PBGT |
R2216 |
The Power Budget evaluation of reception of a neighboring cell related to the serving cell. | ||
|
PBGT |
R2116 |
The Power Budget evaluation of reception of a neighboring cell related to the serving cell. | ||
|
PBGT |
R716 |
The Power Budget evaluation of reception of a neighboring cell related to the serving cell. | ||
|
PBGT |
R2516 |
The Power Budget evaluation of reception of a neighboring cell related to the serving cell. | ||
|
PBGT |
R1116 |
The Power Budget evaluation of reception of a neighboring cell related to the serving cell. | ||
|
PBGT |
R1816 |
The Power Budget evaluation of reception of a neighboring cell related to the serving cell. | ||
|
PBGT |
R1716 |
The Power Budget evaluation of reception of a neighboring cell related to the serving cell. | ||
|
PBGT |
R1316 |
The Power Budget evaluation of reception of a neighboring cell related to the serving cell. | ||
|
PBGT |
R1616 |
The Power Budget evaluation of reception of a neighboring cell related to the serving cell. | ||
|
PBGT |
R1516 |
The Power Budget evaluation of reception of a neighboring cell related to the serving cell. | ||
|
PBGT |
R1416 |
The Power Budget evaluation of reception of a neighboring cell related to the serving cell. | ||
|
PBGT |
R2716 |
The Power Budget evaluation of reception of a neighboring cell related to the serving cell. | ||
|
PBGT |
R2616 |
The Power Budget evaluation of reception of a neighboring cell related to the serving cell. | ||
|
PBGT |
R1216 |
The Power Budget evaluation of reception of a neighboring cell related to the serving cell. | ||
|
PBGT |
R2016 |
The Power Budget evaluation of reception of a neighboring cell related to the serving cell. | ||
|
RECEIVED_TIMESTAMP |
R03 |
The Absolute Date and Time (accuracy 1/10 sec) at which the measurement result message was received from the CELL by the BSS. | ||
|
RTCH_TYPE |
R01a |
The RTCH channel type to which the Observation relates (full rate or half rate RTCH channel). | ||
|
SAMPLE_RATE |
R17 |
Indicates the sample rate value at the time the observation is collected. |
This measurement type provides observation reports on the BSS internal intra-cell or inter-cell SDCCH or TCH (in HR or FR usage) handover procedure. An observation is composed of a set of records, each record being related to a single channel seizure within the observed cell.
Type 12 can be used in On-Demand Measurement-Campaigns. It can be activated on a limited number of cells.
|
Type |
|
|
|
|
|
A_LEV_HO |
HO23 |
Averaging window size for calculating the Uplink and Downlink Levels of the serving cell. This value is in the range 1 to 31 SACCH Multi-frames. | ||
|
A_LEV_MCHO |
HO23a |
This Observation data is only related to microcellular environment. It is the averaging window size for calculating the Uplink and Downlink Levels of the serving cell in a microcellular environment. This value is in the range 1 to 15 SACCH Multi-frames. | ||
|
A_PBGT_HO |
HO27 |
Averaging window size for calculating the Power Budget of the serving cell relating to the neighbouring cells. This value is in the range 1 to 31 SACCH Multi-frames. | ||
|
A_QUAL_HO |
HO30 |
Averaging window size for calculating the Uplink and Downlink Qualities of the serving cell. This value is in the range 1 to 31 SACCH Multi-frames. | ||
|
A_RANGE_HO |
HO34 |
Averaging window size for calculating the Distance of the serving cell. This value is in the range 1 to 31 SACCH Multi-frames. | ||
|
AV_RANGE_HO (12) |
HO36 |
The last average Distance of the serving cell. | ||
|
AV_RXLEV_DL_HO (12) |
HO26 |
The last average Downlink Level of the serving cell. | ||
|
AV_RXLEV_DL_MCHO (12) |
HO26a |
Indicates the average receive downlink level of the serving cell, as used by the handover algorithm (related to microcellular environment). | ||
|
AV_RXLEV_PBGT_HO (12) |
HO29 |
The last average Downlink Power Budget of the serving cell. | ||
|
AV_RXLEV_UL_HO (12) |
HO25 |
The last average Uplink Level of the serving cell. | ||
|
AV_RXLEV_UL_MCHO (12) |
HO25a |
Last average Uplink Level for microcell handover purposes of the serving cell (related to microcellular environment). | ||
|
AV_RXQUAL_DL_HO (12) |
HO33 |
The last average Downlink Quality of the serving cell. | ||
|
AV_RXQUAL_UL_HO (12) |
HO32 |
The last average Uplink Quality of the serving cell. | ||
|
BS_TXPWR |
HO38 |
Transmit power at the BTS. | ||
|
BSIC |
HO1147 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
HO847 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
HO947 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
HO1347 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
HO1647 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
HO747 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
HO1547 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
HO1247 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
HO1447 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
HO1047 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
HO347 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
HO647 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
HO147 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
HO547 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
HO247 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
HO447 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
FREQ |
HO1248 |
The Absolute Radio Frequency Number of a neighboring cell. | ||
|
FREQ |
HO148 |
The Absolute Radio Frequency Number of a neighboring cell. | ||
|
FREQ |
HO1148 |
The Absolute Radio Frequency Number of a neighboring cell. | ||
|
FREQ |
HO248 |
The Absolute Radio Frequency Number of a neighboring cell. | ||
|
FREQ |
HO748 |
The Absolute Radio Frequency Number of a neighboring cell. | ||
|
FREQ |
HO348 |
The Absolute Radio Frequency Number of a neighboring cell. | ||
|
FREQ |
HO648 |
The Absolute Radio Frequency Number of a neighboring cell. | ||
|
FREQ |
HO448 |
The Absolute Radio Frequency Number of a neighboring cell. | ||
|
FREQ |
HO948 |
The Absolute Radio Frequency Number of a neighboring cell. | ||
|
FREQ |
HO548 |
The Absolute Radio Frequency Number of a neighboring cell. | ||
|
FREQ |
HO848 |
The Absolute Radio Frequency Number of a neighboring cell. | ||
|
FREQ |
HO1048 |
The Absolute Radio Frequency Number of a neighboring cell. | ||
|
FREQ |
HO1648 |
The Absolute Radio Frequency Number of a neighboring cell. | ||
|
FREQ |
HO1448 |
The Absolute Radio Frequency Number of a neighboring cell. | ||
|
FREQ |
HO1348 |
The Absolute Radio Frequency Number of a neighboring cell. | ||
|
FREQ |
HO1548 |
The Absolute Radio Frequency Number of a neighboring cell. | ||
|
HO_CAUSE |
HO11 |
Indicates the reason for the external handover attempt. | ||
|
HO_DURATION |
HO8 |
Indicates the time in tenths of seconds between the sending of the 04.08 HANDOVER COMMAND message and the reception of the 04.08 HANDOVER COMPLETE message for an internal inter-cell handover. | ||
|
HO_REQUIRED_TIME_STAMP |
HO3 |
Indicates the Absolute Date and Time at which the 08.08 HANDOVER REQUIRED message was sent (accuracy 1/10 sec.). | ||
|
INTRA_INTER_CELL_IND |
HO2 |
Indicates whether or not the observation record relates to an intra-cell handover or an inter-cell handover attempt. | ||
|
MS_SPEED |
HO75 |
This Observation data is only related to microcellular environment. It is an estimation for mobile speed discrimination process used to initiate or not a handover from an upper layer cell to an lower layer cell. | ||
|
MS_TXPWR |
HO37 |
Transmit power at the Mobile. | ||
|
NEW_CHANNEL_ID |
HO6 |
The target channel identity of the external incoming handover, including BTS Number, Sector Number, TRX Number, TRX Timeslot, and Sub-channel. | ||
|
NEW_RTCH_TYPE |
HO6a |
The target channel type of the internal handover to which the Observation relates (full rate or half rate RTCH channel).This counter is only relevant in case the target channel is an RTCH channel. | ||
|
OLD_CHANNEL_ID |
HO5 |
The serving channel identity of the external handover, including BTS Number, Sector Number, TRX Number, TRX Timeslot, and Sub-channel. | ||
|
OLD_RTCH_TYPE |
HO5a |
The serving channel type of the internal handover to which the Observation relates (full rate or half rate RTCH channel). This counter is only relevant in case the serving channel is an RTCH channel. | ||
|
RXLEV |
HO249 |
The last 4 Receive Levels of a neighboring cell as seen by the Mobile. | ||
|
RXLEV |
HO549 |
The last 4 Receive Levels of a neighboring cell as seen by the Mobile. | ||
|
RXLEV |
HO149 |
The last 4 Receive Levels of a neighboring cell as seen by the Mobile. | ||
|
RXLEV |
HO849 |
The last 4 Receive Levels of a neighboring cell as seen by the Mobile. | ||
|
RXLEV |
HO449 |
The last 4 Receive Levels of a neighboring cell as seen by the Mobile. | ||
|
RXLEV |
HO1549 |
The last 4 Receive Levels of a neighboring cell as seen by the Mobile. | ||
|
RXLEV |
HO1349 |
The last 4 Receive Levels of a neighboring cell as seen by the Mobile. | ||
|
RXLEV |
HO1249 |
The last 4 Receive Levels of a neighboring cell as seen by the Mobile. | ||
|
RXLEV |
HO1449 |
The last 4 Receive Levels of a neighboring cell as seen by the Mobile. | ||
|
RXLEV |
HO1149 |
The last 4 Receive Levels of a neighboring cell as seen by the Mobile. | ||
|
RXLEV |
HO649 |
The last 4 Receive Levels of a neighboring cell as seen by the Mobile. | ||
|
RXLEV |
HO1049 |
The last 4 Receive Levels of a neighboring cell as seen by the Mobile. | ||
|
RXLEV |
HO1649 |
The last 4 Receive Levels of a neighboring cell as seen by the Mobile. | ||
|
RXLEV |
HO949 |
The last 4 Receive Levels of a neighboring cell as seen by the Mobile. | ||
|
RXLEV |
HO749 |
The last 4 Receive Levels of a neighboring cell as seen by the Mobile. | ||
|
RXLEV |
HO349 |
The last 4 Receive Levels of a neighboring cell as seen by the Mobile. | ||
|
SAMPLE_RATE |
HO74 |
Indicates the sample rate value at the time the observation is collected. | ||
|
SIGNALLING_TRAFFIC_IND |
HO1 |
Indicates whether or not the observation record relates to an SDCCH handover or RTCH handover attempt. | ||
|
SUCCESS_FAILURE_IND |
HO7 |
Indicates whether the observed external handover was successful or not. | ||
|
SYNCHRONIZED |
HO12 |
Indicates whether or not the observed external incoming handover was between 2 synchronized BTS. |
This measurement type provides detailed observation reports on the incoming external SDCCH or TCH (in HR or FR usage) handover procedure. An observation is composed of a set of records, each record being related to a single channel seizure within the observed cell.
Type 13 can be used in On-Demand Measurement-Campaigns. It can be activated on a limited number of cells.
|
Type |
|
|
|
|
|
HO_REQUEST_TIME_STAMP |
HO42 |
Indicates the Absolute Date and Time at which the 08.08 HANDOVER REQUEST message was received (accuracy 1/10 sec.). | ||
|
INCOMING_HO_IND |
HO41 |
Indicates whether or not the observation record relates to an external incoming handover. | ||
|
NEW_CHANNEL_ID |
HO43 |
The target channel identity of the external incoming handover, including BTS Number, Sector Number, TRX Number, TRX Timeslot, and Sub-channel. | ||
|
NEW_RTCH_TYPE |
HO43a |
The target channel type of the internal handover to which the Observation relates (full rate or half rate RTCH channel).This counter is only relevant in case the target channel is an RTCH channel. | ||
|
SAMPLE_RATE |
HO46 |
Indicates the sample rate value at the time the observation is collected. | ||
|
SIGNALLING_TRAFFIC_IND |
HO40 |
Indicates whether or not the observation record relates to an SDCCH handover or RTCH handover attempt. | ||
|
SUCCESS_FAILURE_IND |
HO44 |
Indicates whether the observed external handover was successful or not. | ||
|
SYNCHRONIZED |
HO45 |
Indicates whether or not the observed external incoming handover was between 2 synchronized BTS. |
This measurement type provides detailed observation reports on the BSS outgoing external SDCCH or TCH (in HR or FR usage) handover procedure. An observation is composed of a set of records, each record being related to a single channel seizure within the observed cell.
Type 14 can be used in On-Demand Measurement-Campaigns. It can be activated on a limited number of cells.
|
Type |
|
|
|
|
|
A_LEV_HO |
HO80 |
Averaging window size for calculating the Uplink and Downlink Levels of the serving cell. This value is in the range 1 to 31 SACCH Multi-frames. | ||
|
A_LEV_MCHO |
HO80a |
This Observation data is only related to microcellular environment. It is the averaging window size for calculating the Uplink and Downlink Levels of the serving cell in a microcellular environment. This value is in the range 1 to 15 SACCH Multi-frames. | ||
|
A_PBGT_HO |
HO84 |
Averaging window size for calculating the Power Budget of the serving cell relating to the neighbouring cells. This value is in the range 1 to 31 SACCH Multi-frames. | ||
|
A_QUAL_HO |
HO87 |
Averaging window size for calculating the Uplink and Downlink Qualities of the serving cell. This value is in the range 1 to 31 SACCH Multi-frames. | ||
|
A_RANGE_HO |
HO91 |
Averaging window size for calculating the Distance of the serving cell. This value is in the range 1 to 31 SACCH Multi-frames. | ||
|
AV_RANGE_HO (12) |
HO93 |
The last average Distance of the serving cell. | ||
|
AV_RXLEV_DL_HO (12) |
HO83 |
The last average Downlink Level of the serving cell. | ||
|
AV_RXLEV_DL_MCHO (12) |
HO83a |
Indicates the average receive downlink level of the serving cell, as used by the handover algorithm (related to microcellular environment). | ||
|
AV_RXLEV_PBGT_HO (12) |
HO86 |
The last average Downlink Power Budget of the serving cell. | ||
|
AV_RXLEV_UL_HO (12) |
HO82 |
The last average Uplink Level of the serving cell. | ||
|
AV_RXLEV_UL_MCHO (12) |
HO82a |
Last average Uplink Level for microcell handover purposes of the serving cell (related to microcellular environment). | ||
|
AV_RXQUAL_DL_HO (12) |
HO90 |
The last average Downlink Quality of the serving cell. | ||
|
AV_RXQUAL_UL_HO (12) |
HO89 |
The last average Uplink Quality of the serving cell. | ||
|
BS_TXPWR |
HO95 |
Transmit power at the BTS. | ||
|
BSIC |
HO898 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
HO1498 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
HO1598 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
HO1698 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
HO1198 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
HO1098 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
HO198 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
HO1298 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
HO998 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
HO798 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
HO1398 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
HO698 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
HO398 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
HO298 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
HO598 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
BSIC |
HO498 |
The Base Station Identity Code (BSIC) of a neighboring cell. | ||
|
FREQ |
HO299 |
The Absolute Radio Frequency Number of a neighboring cell. | ||
|
FREQ |
HO899 |
The Absolute Radio Frequency Number of a neighboring cell. | ||
|
FREQ |
HO1699 |
The Absolute Radio Frequency Number of a neighboring cell. | ||
|
FREQ |
HO999 |
The Absolute Radio Frequency Number of a neighboring cell. | ||
|
FREQ |
HO799 |
The Absolute Radio Frequency Number of a neighboring cell. | ||
|
FREQ |
HO1499 |
The Absolute Radio Frequency Number of a neighboring cell. | ||
|
FREQ |
HO1099 |
The Absolute Radio Frequency Number of a neighboring cell. | ||
|
FREQ |
HO399 |
The Absolute Radio Frequency Number of a neighboring cell. | ||
|
FREQ |
HO1299 |
The Absolute Radio Frequency Number of a neighboring cell. | ||
|
FREQ |
HO699 |
The Absolute Radio Frequency Number of a neighboring cell. | ||
|
FREQ |
HO1599 |
The Absolute Radio Frequency Number of a neighboring cell. | ||
|
FREQ |
HO499 |
The Absolute Radio Frequency Number of a neighboring cell. | ||
|
FREQ |
HO199 |
The Absolute Radio Frequency Number of a neighboring cell. | ||
|
FREQ |
HO1399 |
The Absolute Radio Frequency Number of a neighboring cell. | ||
|
FREQ |
HO1199 |
The Absolute Radio Frequency Number of a neighboring cell. | ||
|
FREQ |
HO599 |
The Absolute Radio Frequency Number of a neighboring cell. | ||
|
HO_CAUSE |
HO68 |
Indicates the reason for the external handover attempt. | ||
|
HO_REQUIRED_NB |
HO63 |
Indicates the number of BSS generated 08.08 HANDOVER REQUIRED messages generated during the handover procedure. | ||
|
HO_REQUIRED_TIME_STAMP |
HO62 |
Indicates the Absolute Date and Time at which the 08.08 HANDOVER REQUIRED message was sent (accuracy 1/10 sec.). | ||
|
MS_SPEED |
HO76 |
This Observation data is only related to microcellular environment. It is an estimation for mobile speed discrimination process used to initiate or not a handover from an upper layer cell to an lower layer cell. | ||
|
MS_TXPWR |
HO94 |
Transmit power at the Mobile. | ||
|
OLD_CHANNEL_ID |
HO64 |
The serving channel identity of the external handover, including BTS Number, Sector Number, TRX Number, TRX Timeslot, and Sub-channel. | ||
|
OLD_RTCH_TYPE |
HO64a |
The serving channel type of the internal handover to which the Observation relates (full rate or half rate RTCH channel). This counter is only relevant in case the serving channel is an RTCH channel. | ||
|
OUTGOING_HO_IND |
HO61 |
Indicates whether or not the observation record relates to an external outgoing handover. | ||
|
RXLEV |
HO3100 |
The last 4 Receive Levels of a neighboring cell as seen by the Mobile. | ||
|
RXLEV |
HO8100 |
The last 4 Receive Levels of a neighboring cell as seen by the Mobile. | ||
|
RXLEV |
HO9100 |
The last 4 Receive Levels of a neighboring cell as seen by the Mobile. | ||
|
RXLEV |
HO10100 |
The last 4 Receive Levels of a neighboring cell as seen by the Mobile. | ||
|
RXLEV |
HO7100 |
The last 4 Receive Levels of a neighboring cell as seen by the Mobile. | ||
|
RXLEV |
HO12100 |
The last 4 Receive Levels of a neighboring cell as seen by the Mobile. | ||
|
RXLEV |
HO5100 |
The last 4 Receive Levels of a neighboring cell as seen by the Mobile. | ||
|
RXLEV |
HO2100 |
The last 4 Receive Levels of a neighboring cell as seen by the Mobile. | ||
|
RXLEV |
HO1100 |
The last 4 Receive Levels of a neighboring cell as seen by the Mobile. | ||
|
RXLEV |
HO13100 |
The last 4 Receive Levels of a neighboring cell as seen by the Mobile. | ||
|
RXLEV |
HO4100 |
The last 4 Receive Levels of a neighboring cell as seen by the Mobile. | ||
|
RXLEV |
HO6100 |
The last 4 Receive Levels of a neighboring cell as seen by the Mobile. | ||
|
RXLEV |
HO11100 |
The last 4 Receive Levels of a neighboring cell as seen by the Mobile. | ||
|
RXLEV |
HO15100 |
The last 4 Receive Levels of a neighboring cell as seen by the Mobile. | ||
|
RXLEV |
HO16100 |
The last 4 Receive Levels of a neighboring cell as seen by the Mobile. | ||
|
RXLEV |
HO14100 |
The last 4 Receive Levels of a neighboring cell as seen by the Mobile. | ||
|
SAMPLE_RATE |
HO111 |
Indicates the sample rate value at the time the observation is collected. | ||
|
SIGNALLING_TRAFFIC_IND |
HO60 |
Indicates whether or not the observation record relates to an SDCCH handover or RTCH handover attempt. | ||
|
SUCCESS_FAILURE_IND |
HO65 |
Indicates whether the observed external handover was successful or not. |
This measurement type provides detailed observation reports on the behaviour of used TCH channels. An observation is composed of a set of records, each record being related to a single channel seizure within the observed cell.
Type 15 can be used in On-Demand Measurement-Campaigns. It can be activated on a limited number of cells.
|
Type |
|
|
|
|
|
BS_POWER |
T06 |
Indicates the last commanded BS Power Level to the encoder. | ||
|
CHANNEL_ID (TCH) |
T01 |
The RTCH channel identity to which the Observation relates, including BTS Number, Sector Number, TRX Number, TRX Timeslot and Sub-channel which is only significant in case of an half rate TCH channel. | ||
|
CHANNEL_RELEASE_TIME |
T03 |
The Absolute Date and Time at which the RTCH channel was released (accuracy 1/10 sec.). | ||
|
CHANNEL_SEIZURE_TIME |
T02 |
The Absolute Date and Time at which the RTCH channel was activated. | ||
|
END_INDICATION (TCH) |
T04 |
Describes how the RTCH channel was released (e.g. successful, LapD failure, other BSS problems, radio failures, MS access problems). | ||
|
MS_POWER |
T05 |
Indicates the last commanded MS Power Level on the SACCH Channel to the Mobile. | ||
|
NB_ERRONEOUS_FRAMES_SENT |
T18 |
Indicates the number of erroneous frames that were received. | ||
|
NB_FRAMES_NOT_REPEATED |
T08 |
Indicates the number of SAPI 0 frames that were not repeated. | ||
|
NB_FRAMES_REPEATED |
T15 |
Indicates the number of SAPI 0 frames that were repeated at least once. | ||
|
NB_MS_TX_PWR_MAX_SENT |
T21 |
This counter indicates the number of 08.58 CONNECTION FAILURE INDICATION messages that were sent to the BSS with a cause value of "set YY_TXPWR_M". | ||
|
NB_PHYSICAL_INFO_SENT |
T17 |
Indicates the number of times 04.08 PHYSICAL INFORMATION message has been sent in case of asynchronous handover. | ||
|
NB_REJ_FRAMES_REC |
T20 |
Indicates the number of Reject (REJ) frames that were received. | ||
|
NB_REJ_FRAMES_SENT |
T19 |
Indicates the number of Reject (REJ) frames that were transmitted. | ||
|
NB_SABM_AFTER_UA_SENT |
T16 |
Indicates the number of SABM received on SAPI 0 when UA has already been sent (i.e. SABM received in established or timer recovery state). | ||
|
PERC_INCOR_SACCH_FRAMES_REC |
T23 |
Indicates the percentage of SACCH frames that could not be decoded. | ||
|
PERC_INCOR_SDCCH_FRAMES_REC |
T24 |
Indicates the percentage of SDCCH frames that could not be decoded. | ||
|
RADIO_LINK_FAILURE_IND |
T22 |
Indicates whether or not a Radio Link Failure was detected or not. | ||
|
RTCH_TYPE |
T01a |
The RTCH channel type to which the Observation relates (full rate or half rate RTCH channel). | ||
|
SAMPLE_RATE |
T25 |
Indicates the sample rate value at the time the observation is collected. | ||
|
SEIZURE_TYPE (TCH) |
T04a |
Describes the purpose for which the TCH channel was seized. | ||
|
TIMING_ADVANCE |
T07 |
Indicates the last commanded Timing Advance on the SACCH Channel to the Mobile. |
|
|
|
|
Meas. | ||
|
C01 |
NB_IMM_ASS_SUCC_MT |
Quality of Service | |||
|
C02 |
NB_IMM_ASS_SUCC_MO |
Quality of Service | |||
|
C02a |
NB_IMM_ASS_SUCC_MO_LOC_UPD |
Quality of Service | |||
|
C02b |
NB_IMM_ASS_SUCC_MO_SMS |
Quality of Service | |||
|
C02c |
NB_IMM_ASS_SUCC_MO_SUP_SERV |
Quality of Service | |||
|
C02d |
NB_IMM_ASS_SUCC_MO_FOLLOW_ON |
Quality of Service | |||
|
C02e |
NB_IMM_ASS_SUCC_MO_CM_REEST |
Quality of Service | |||
|
C02f |
NB_IMM_ASS_SUCC_MO_L3INFO_UNKNOW |
Quality of Service | |||
|
C02g |
NB_IMM_ASS_SUCC_MO_IMSI_DETACH |
Quality of Service | |||
|
C02h |
NB_IMM_ASS_SUCC_MO_CALL_EST |
Quality of Service | |||
|
C03 |
NB_OUT_SDCCH_HO_SUCC |
Quality of Service | |||
|
C04 |
NB_IMM_ASS_PREP_FAIL_CONG |
Quality of Service | |||
|
C07 |
NB_SDCCH_DROP_OUT_HO |
Quality of Service | |||
|
C10 |
NB_INC_SDCCH_HO_SUCC |
Quality of Service | |||
|
C100 |
NB_OUT_INT_SDCCH_HO_ATPT |
Handover 16116n133q | |||
|
C101 |
NB_INTRA_SDCCH_HO_PREP_FAIL_CONG |
Handover 16116n133q | |||
|
C102 |
NB_INTRA_SDCCH_HO_SUCC |
Handover 16116n133q | |||
|
C103 |
NB_INTRA_SDCCH_HO_EXEC_FAIL_NO_REV |
Handover 16116n133q | |||
|
C107 |
NB_INTRA_SDCCH_HO_EXEC_FAIL_REV |
Handover 16116n133q | |||
|
C115 |
NB_SDCCH_HO_MSC_TRIG |
Handover 16116n133q | |||
|
C136 |
NB_TCH_DROP_EST_PHAS_RLF |
Quality of Service | |||
|
C137 |
NB_SDCCH_DROP_EST_PHAS_BSS_PB |
Quality of Service | |||
|
C138 |
NB_SDCCH_DROP_EST_PHAS_RLF |
Quality of Service | |||
|
C139 |
NB_TCH_DROP_EST_PHAS_REM_TRANS_FAIL |
Quality of Service | |||
|
C13a |
NB_TCH_NOR_ASS_QUEUED |
Traffic Load | |||
|
C13b |
NB_INC_EXT_TCH_HO_QUEUED |
Traffic Load | |||
|
C14 |
NB_TCH_NOR_ASS_HO_EST_PHAS_FAIL_BSS_PB |
Quality of Service | |||
|
C141 |
AV_NB_TCH_QUEUED |
Resource Availability & Usage | |||
|
C142a |
NB_OUT_FORCED_IDR_SUCC |
Handover 16116n133q | |||
|
C142b |
NB_OUT_FORCED_EDR_SUCC |
Handover 16116n133q | |||
|
C142c |
NB_OUT_NOR_IDR_SUCC |
Handover 16116n133q | |||
|
C142d |
NB_OUT_NOR_EDR_SUCC |
Handover 16116n133q | |||
|
C143a |
NB_OUT_FORCED_IDR_EXEC_FAIL_REV |
Handover 16116n133q | |||
|
C143b |
NB_OUT_FORCED_IDR_EXEC_FAIL_NO_REV |
Handover 16116n133q | |||
|
C143c |
NB_OUT_FORCED_EDR_EXEC_FAIL_REV |
Handover 16116n133q | |||
|
C143d |
NB_OUT_FORCED_EDR_EXEC_FAIL_NO_REV |
Handover 16116n133q | |||
|
C143e |
NB_OUT_NOR_IDR_EXEC_FAIL_REV |
Handover 16116n133q | |||
|
C143f |
NB_OUT_NOR_IDR_EXEC_FAIL_NO_REV |
Handover 16116n133q | |||
|
C143g |
NB_OUT_NOR_EDR_EXEC_FAIL_REV |
Handover 16116n133q | |||
|
C143h |
NB_OUT_NOR_EDR_EXEC_FAIL_NO_REV |
Handover 16116n133q | |||
|
C144a |
NB_OUT_FORCED_IDR_REQ |
Handover 16116n133q | |||
|
C144b |
NB_OUT_FORCED_EDR_REQ |
Handover 16116n133q | |||
|
C144c |
NB_OUT_NOR_IDR_REQ |
Handover 16116n133q | |||
|
C144d |
NB_OUT_NOR_EDR_REQ |
Handover 16116n133q | |||
|
C145a |
NB_OUT_FORCED_IDR_ATPT |
Handover 16116n133q | |||
|
C145b |
NB_OUT_FORCED_EDR_ATPT |
Handover 16116n133q | |||
|
C145c |
NB_OUT_NOR_IDR_ATPT |
Handover 16116n133q | |||
|
C145d |
NB_OUT_NOR_EDR_ATPT |
Handover 16116n133q | |||
|
C146b |
NB_TCH_NOR_ASS_EXEC_FAIL_RADIO |
Quality of Service | |||
|
C147 |
NB_INC_SDCCH_HO_ALLOC |
Traffic Load | |||
|
C148 |
NB_IMM_ASS_ALLOC |
Traffic Load | |||
|
C149 |
NB_IMM_ASS_EXEC_FAIL_RADIO |
Quality of Service | |||
|
C14a |
NB_TCH_DROP_HO_PREP_EXEC_FAIL_BSS_PB |
Quality of Service | |||
|
C14b |
NB_TCH_NOR_ASS_PREP_EXEC_FAIL_BSS_PB |
Quality of Service | |||
|
C14c |
NB_TCH_DROP_EST_PHAS_BSS_PB |
Quality of Service | |||
|
C150a |
NB_MULTIBAND_MS_ACCESS_EXCEPT_LU |
Traffic Load | |||
|
C151 |
NB_INC_IDR_SUCC (29) |
Handover 16116n133q | |||
|
C152 |
NB_INC_IDR_EXEC_FAIL_MS_ACCESS |
Handover 16116n133q | |||
|
C153 |
NB_INC_IDR_REQ |
Handover 16116n133q | |||
|
C153a |
NB_N7_CON_EST_FAIL_DUE_NSS |
Quality of Service | |||
|
C153b |
NB_N7_CON_EST_FAIL_DUE_BSS |
Quality of Service | |||
|
C154 |
NB_INC_IDR_ATPT |
Handover 16116n133q | |||
|
C155 |
NB_INC_IDR_PREP_FAIL_CONG |
Handover 16116n133q | |||
|
C15a |
NB_INC_IDR_ALLOC |
Traffic Load | |||
|
C15b |
NB_INC_TCH_HO_ALLOC |
Traffic Load | |||
|
C16 |
NB_TCH_NOR_ASS_ALLOC |
Traffic Load | |||
|
C161a |
NB_DTAP_MO_NOR_ASS_SUCC |
Quality of Service | |||
|
C161b |
NB_DTAP_MT_NOR_ASS_SUCC |
Quality of Service | |||
|
C162a |
NB_TCH_DROP_DTAP_EST_PHAS_RLF |
Quality of Service | |||
|
C162b |
NB_TCH_DROP_DTAP_EST_PHAS_BSS_PB |
Quality of Service | |||
|
C162c |
NB_TCH_DROP_DTAP_EST_PHAS_REM_TRANS_FAIL |
Quality of Service | |||
|
C17a |
NB_INC_IDR_SUCC (1) |
Quality of Service | |||
|
C17b |
NB_INC_TCH_HO_SUCC |
Quality of Service | |||
|
C18 |
NB_TCH_NOR_ASS_SUCC |
Quality of Service | |||
|
C180a |
NB_N7_CLEAR_REQ_RadioIntMessFail |
Quality of Service | |||
|
C180b |
NB_N7_CLEAR_REQ_O&Minterv |
Quality of Service | |||
|
C180c |
NB_N7_CLEAR_REQ_EquipFail |
Quality of Service | |||
|
C180d |
NB_N7_CLEAR_REQ_RadioIntFail |
Quality of Service | |||
|
C180e |
NB_N7_CLEAR_REQ_NoRadioResAvail |
Quality of Service | |||
|
C181a |
NB_N7_ASS_FAIL_RadioIntMessFail |
Quality of Service | |||
|
C181b |
NB_N7_ASS_FAIL_O&Minterv |
Quality of Service | |||
|
C181c |
NB_N7_ASS_FAIL_EquipFail |
Quality of Service | |||
|
C181d |
NB_N7_ASS_FAIL_NoRadioResAvail |
Quality of Service | |||
|
C181e |
NB_N7_ASS_FAIL_ReqTerResUnav/Alloc |
Quality of Service | |||
|
C181f |
NB_N7_ASS_FAIL_ReqTrans/RateUnav |
Quality of Service | |||
|
C181g |
NB_N7_ASS_FAIL_RadioIntFailRevOldChan |
Quality of Service | |||
|
C181h |
NB_N7_ASS_FAIL_RadioIntFail |
Quality of Service | |||
|
C181i |
NB_N7_ASS_FAIL_CipherAlgoNotSupp |
Quality of Service | |||
|
C181j |
NB_N7_ASS_FAIL_BSSnotEquip |
Quality of Service | |||
|
C181k |
NB_N7_ASS_FAIL_ProtocolError |
Quality of Service | |||
|
C181l |
NB_N7_ASS_FAIL_ReqSpeechVersUnav |
Quality of Service | |||
|
C182 |
NB_N7_CLEAR_REQ_EST_PHAS |
Quality of Service | |||
|
C190 |
NB_SMS_PP_CON_MO_SDCCH |
Quality of Service | |||
|
C191 |
NB_SMS_PP_CON_MT_SDCCH |
Quality of Service | |||
|
C192 |
NB_SMS_PP_CON_MO_SACCH |
Quality of Service | |||
|
C193 |
NB_SMS_PP_CON_MT_SACCH |
Quality of Service | |||
|
C194a |
NB_SMS_PP_CON_REJ_RadioIntFail |
Quality of Service | |||
|
C194b |
NB_SMS_PP_CON_REJ_BSSnotEquip |
Quality of Service | |||
|
C194c |
NB_SMS_PP_CON_REJ_ProtocolError |
Quality of Service | |||
|
C195 |
NB_SMS_PP_CON_REL_LAPDM_ERROR |
Quality of Service | |||
|
C20 |
NB_OUT_TCH_HO_SUCC |
Quality of Service | |||
|
C21 |
NB_TCH_DROP_OUT_HO_EXEC |
Quality of Service | |||
|
C220 |
NB_INC_EXT_TCH_HO_REQ |
Handover 16116n133q | |||
|
C221 |
NB_INC_EXT_TCH_HO_ATPT |
Handover 16116n133q | |||
|
C230 |
NB_INC_INT_TCH_HO_REQ |
Handover 16116n133q | |||
|
C231 |
NB_INC_INT_TCH_HO_ATPT |
Handover 16116n133q | |||
|
C24 |
AV_NB_NOT_AVAIL_TRX_TS |
Resource Availability & Usage | |||
|
C250 |
AV_NB_AVAIL_TCH |
Resource Availability & Usage | |||
|
C251 |
NB_N7_UNIT_DATA_SENT |
Traffic Load | |||
|
C252 |
NB_N7_UNIT_DATA_REC |
Traffic Load | |||
|
C253 |
NB_N7_CON_REQ_SENT |
Traffic Load | |||
|
C254 |
NB_N7_CON_REQ_REC |
Traffic Load | |||
|
C255 |
NB_N7_CON_CONF_SENT |
Traffic Load | |||
|
C256 |
NB_N7_CON_CONF_REC |
Traffic Load | |||
|
C257 |
NB_N7_CON_REF_SENT |
Quality of Service | |||
|
C258 |
NB_N7_CON_REF_REC |
Quality of Service | |||
|
C26 |
AV_NB_AVAIL_SDCCH |
Resource Availability & Usage | |||
|
C27 |
AV_NB_AVAIL_CCCH |
Resource Availability & Usage | |||
|
C270 |
NB_INTRA_TCH_HO_REQ |
Handover 16116n133q | |||
|
C271 |
NB_INTRA_TCH_HO_ATPT |
Handover 16116n133q | |||
|
C28 |
AV_NB_BUSY_TCH |
Resource Availability & Usage | |||
|
C29 |
NB_MAX_SIMUL_BUSY_TCH |
Resource Availability & Usage | |||
|
C30 |
AV_NB_BUSY_SDCCH |
Resource Availability & Usage | |||
|
C31 |
NB_MAX_SIMUL_BUSY_SDCCH |
Resource Availability & Usage | |||
|
C310 |
NB_INC_EXT_SDCCH_HO_REQ |
Handover 16116n133q | |||
|
C311 |
NB_INC_EXT_SDCCH_HO_ATPT |
Handover 16116n133q | |||
|
C320a |
AV_NB_IDLE_TCH_INTERF_BAND1 |
Resource Availability & Usage | |||
|
C320b |
AV_NB_IDLE_TCH_INTERF_BAND2 |
Resource Availability & Usage | |||
|
C320c |
AV_NB_IDLE_TCH_INTERF_BAND3 |
Resource Availability & Usage | |||
|
C320d |
AV_NB_IDLE_TCH_INTERF_BAND4 |
Resource Availability & Usage | |||
|
C320e |
AV_NB_IDLE_TCH_INTERF_BAND5 |
Resource Availability & Usage | |||
|
C330 |
NB_INC_INT_SDCCH_HO_REQ |
Handover 16116n133q | |||
|
C331 |
NB_INC_INT_SDCCH_HO_ATPT |
Handover 16116n133q | |||
|
C34 |
TIME_ALL_AVAIL_TRX_TS_BUSY |
Resource Availability & Usage | |||
|
C360 |
NB_INTRA_SDCCH_HO_REQ |
Handover 16116n133q | |||
|
C361 |
NB_INTRA_SDCCH_HO_ATPT |
Handover 16116n133q | |||
|
C370a |
NB_TCH_FR_ALLOC |
Resource Availability & Usage | |||
|
C370b |
NB_TCH_HR_ALLOC |
Resource Availability & Usage | |||
|
C380a |
TIME_FR_TCH_BUSY |
Traffic Load | |||
|
C380b |
TIME_HR_TCH_BUSY |
Traffic Load | |||
|
C381a |
TIME_FR_TCH_BUSY_BY_MULTIBAND_MS |
Traffic Load | |||
|
C381b |
TIME_HR_TCH_BUSY_BY_MULTIBAND_MS |
Traffic Load | |||
|
C39 |
NB_TIMES_SDCCH_BUSY |
Resource Availability & Usage | |||
|
C40 |
TIME_SDCCH_BUSY |
Traffic Load | |||
|
C400 |
NB_ADJ_BSC_INC_HO_REQ |
Adjacency | |||
|
C401 |
NB_ADJ_BSC_INC_HO_ATPT |
Adjacency | |||
|
C402 |
NB_ADJ_BSC_INC_HO_SUCC |
Adjacency | |||
|
C41 |
NB_INC_EXT_TCH_HO_PREP_FAIL |
Handover 16116n133q | |||
|
C411 |
NB_OUT_INT_TCH_HO_IDR_IN_ZONE_REQ |
Handover 16116n133q | |||
|
C412 |
NB_OUT_INT_TCH_HO_IDR_IN_ZONE_EXEC_FAIL |
Handover 16116n133q | |||
|
C413 |
NB_TCH_NOR_ASS_INNER_ZONE_ALLOC |
Traffic Load | |||
|
C41a |
NB_INC_EXT_TCH_HO_PREP_FAIL_CONG |
Handover 16116n133q | |||
|
C41b |
NB_INC_EXT_TCH_HO_PREP_FAIL_NO_TTCH |
Handover 16116n133q | |||
|
C42 |
NB_INC_EXT_TCH_HO_SUCC |
Handover 16116n133q | |||
|
C43 |
NB_INC_EXT_TCH_HO_EXEC_FAIL_MS_ACCESS |
Handover 16116n133q | |||
|
C440 |
NB_TCH_HO_ATPT_23_TrafHandover 16116n133q |
Handover 16116n133q | |||
|
C441 |
NB_ADJ_SCELL_OUT_TCH_HO_23_ATPT |
Adjacency | |||
|
C442 |
NB_TIMES_TRAF_DETECTED_HIGH |
Resource Availability & Usage | |||
|
C443 |
NB_TIMES_TRAF_DETECTED_LOW |
Resource Availability & Usage | |||
|
C444 |
NB_TCH_HO_ATPT_24_GenCaptureHandover 16116n133q |
Handover 16116n133q | |||
|
C445 |
NB_SDCCH_HO_ATPT_23_TrafHandover 16116n133q |
Handover 16116n133q | |||
|
C446 |
NB_SDCCH_HO_ATPT_24_GenCaptureHandover 16116n133q |
Handover 16116n133q | |||
|
C45 |
NB_OUT_EXT_TCH_HO_REQ |
Handover 16116n133q | |||
|
C450 |
NB_TCH_HO_ATPT_22_TooShortDistance |
Handover 16116n133q | |||
|
C451 |
NB_ADJ_SCELL_OUT_TCH_HO_12_NOT_TRIG |
Adjacency | |||
|
C453 |
NB_ADJ_SCELL_OUT_TCH_HO_13_NOT_TRIG |
Adjacency | |||
|
C454 |
NB_SDCCH_HO_ATPT_22_TooShortDistance |
Handover 16116n133q | |||
|
C46 |
NB_OUT_EXT_TCH_HO_SUCC |
Handover 16116n133q | |||
|
C47 |
NB_OUT_EXT_TCH_HO_EXEC_FAIL_REV |
Handover 16116n133q | |||
|
C470 |
NB_TCH_HO_ATPT_2_TooLowQualUp |
Handover 16116n133q | |||
|
C471 |
NB_TCH_HO_ATPT_3_TooLowLevUp |
Handover 16116n133q | |||
|
C472 |
NB_TCH_HO_ATPT_4_TooLowQualDown |
Handover 16116n133q | |||
|
C473 |
NB_TCH_HO_ATPT_5_TooLowLevDown |
Handover 16116n133q | |||
|
C474 |
NB_TCH_HO_ATPT_6_TooLongDistance |
Handover 16116n133q | |||
|
C476 |
NB_TCH_HO_ATPT_15_TooHighLevInterfUp |
Handover 16116n133q | |||
|
C477 |
NB_TCH_HO_ATPT_16_TooHighLevInterfDown |
Handover 16116n133q | |||
|
C478 |
NB_TCH_HO_ATPT_12_TooLowPowBudg |
Handover 16116n133q | |||
|
C479 |
NB_TCH_HO_ATPT_21_HighLevNeigCellPrefBand |
Handover 16116n133q | |||
|
C48 |
NB_OUT_EXT_TCH_HO_EXEC_FAIL_NO_REV |
Handover 16116n133q | |||
|
C50 |
NB_OUT_EXT_TCH_HO_ATPT |
Handover 16116n133q | |||
|
C51 |
NB_INC_INT_TCH_HO_PREP_FAIL_CONG |
Handover 16116n133q | |||
|
C510 |
NB_SDCCH_HO_ATPT_2_TooLowQualUp |
Handover 16116n133q | |||
|
C511 |
NB_SDCCH_HO_ATPT_3_TooLowLevUp |
Handover 16116n133q | |||
|
C512 |
NB_SDCCH_HO_ATPT_4_TooLowQualDown |
Handover 16116n133q | |||
|
C513 |
NB_SDCCH_HO_ATPT_5_TooLowLevDown |
Handover 16116n133q | |||
|
C514 |
NB_SDCCH_HO_ATPT_6_TooLongDistance |
Handover 16116n133q | |||
|
C516 |
NB_SDCCH_HO_ATPT_15_TooHighLevInterfUp |
Handover 16116n133q | |||
|
C517 |
NB_SDCCH_HO_ATPT_16_TooHighLevInterfDown |
Handover 16116n133q | |||
|
C518 |
NB_SDCCH_HO_ATPT_12_TooLowPowBudg |
Handover 16116n133q | |||
|
C519 |
NB_SDCCH_HO_ATPT_21_HighLevNeigCellPrefBand |
Handover 16116n133q | |||
|
C52 |
NB_INC_INT_TCH_HO_SUCC |
Handover 16116n133q | |||
|
C53 |
NB_INC_INT_TCH_HO_EXEC_FAIL_MS_ACCESS |
Handover 16116n133q | |||
|
C55a |
NB_OUT_INT_TCH_HO_REQ |
Handover 16116n133q | |||
|
C56 |
NB_OUT_INT_TCH_HO_SUCC |
Handover 16116n133q | |||
|
C57 |
NB_OUT_INT_TCH_HO_EXEC_FAIL_REV |
Handover 16116n133q | |||
|
C58 |
NB_OUT_INT_TCH_HO_EXEC_FAIL_NO_REV |
Handover 16116n133q | |||
|
C585a |
NB_TCH_HO_ATPT_7_ConsBadSACCHmicroCell |
Handover 16116n133q | |||
|
C585d |
NB_TCH_HO_ATPT_17_TooLowLevUpMicroCell |
Handover 16116n133q | |||
|
C585e |
NB_TCH_HO_ATPT_18_TooLowLevDownMicroCell |
Handover 16116n133q | |||
|
C585f |
NB_TCH_HO_ATPT_14_HighLevNeigLowCellSlowMS |
Handover 16116n133q | |||
|
C586a |
NB_TCH_HO_ATPT_10_TooLowLevUpInZone |
Handover 16116n133q | |||
|
C586b |
NB_TCH_HO_ATPT_11_TooLowLevDownInZone |
Handover 16116n133q | |||
|
C586c |
NB_TCH_HO_ATPT_13_TooHighLevUpDownOutZone |
Handover 16116n133q | |||
|
C60 |
NB_OUT_INT_TCH_HO_ATPT |
Handover 16116n133q | |||
|
C605a |
NB_SDCCH_HO_ATPT_7_ConsBadSACCHmicroCell |
Handover 16116n133q | |||
|
C605d |
NB_SDCCH_HO_ATPT_17_TooLowLevUpMicroCell |
Handover 16116n133q | |||
|
C605e |
NB_SDCCH_HO_ATPT_18_TooLowLevDownMicroCell |
Handover 16116n133q | |||
|
C605f |
NB_SDCCH_HO_ATPT_14_HighLevNeigLowCellSlowMS |
Handover 16116n133q | |||
|
C607 |
NB_SDCCH_HO_ATPT_20_HighLevNeigCellForcDR |
Handover 16116n133q | |||
|
C61 |
NB_INTRA_TCH_HO_PREP_FAIL_CONG |
Handover 16116n133q | |||
|
C612 |
NB_TCH_NOR_ASS_PREP_FAIL_CONG |
Quality of Service | |||
|
C612a |
NB_TCH_NOR_ASS_PREP_FAIL_NO_QUEUE |
Quality of Service | |||
|
C612b |
NB_TCH_NOR_ASS_PREP_FAIL_QUEUE_FULL |
Quality of Service | |||
|
C612c |
NB_TCH_NOR_ASS_PREP_FAIL_T11_EXP |
Quality of Service | |||
|
C612d |
NB_TCH_NOR_ASS_PREP_FAIL_QUEUE_REJ |
Quality of Service | |||
|
C62 |
NB_INTRA_TCH_HO_SUCC |
Handover 16116n133q | |||
|
C63 |
NB_INTRA_TCH_HO_EXEC_FAIL_NO_REV |
Handover 16116n133q | |||
|
C67 |
NB_INTRA_TCH_HO_EXEC_FAIL_REV |
Handover 16116n133q | |||
|
C720 |
NB_ADJ_SCELL_OUT_TCH_HO_ATPT |
Adjacency | |||
|
C721 |
NB_ADJ_SCELL_OUT_TCH_HO_SUCC |
Adjacency | |||
|
C722 |
NB_ADJ_SCELL_OUT_TCH_HO_EXEC_FAIL_REV |
Adjacency | |||
|
C723 |
NB_ADJ_SCELL_OUT_TCH_HO_EXEC_FAIL_NO_REV |
Adjacency | |||
|
C730 |
NB_ADJ_TCELL_INC_TCH_HO_ATPT |
Adjacency | |||
|
C731 |
NB_ADJ_TCELL_INC_TCH_HO_SUCC |
Adjacency | |||
|
C733 |
NB_ADJ_TCELL_INC_TCH_HO_EXEC_FAIL_MS_ACC |
Adjacency | |||
|
C75 |
NB_TCH_HO_MSC_TRIG |
Handover 16116n133q | |||
|
C80 |
TIME_ALL_AVAIL_SDCCH_BUSY |
Resource Availability & Usage | |||
|
C81 |
NB_INC_EXT_SDCCH_HO_PREP_FAIL_CONG |
Handover 16116n133q | |||
|
C82 |
NB_INC_EXT_SDCCH_HO_SUCC |
Handover 16116n133q | |||
|
C83 |
NB_INC_EXT_SDCCH_HO_EXEC_FAIL_MS_ACCESS |
Handover 16116n133q | |||
|
C85 |
NB_OUT_EXT_SDCCH_HO_REQ |
Handover 16116n133q | |||
|
C86 |
NB_OUT_EXT_SDCCH_HO_SUCC |
Handover 16116n133q | |||
|
C87 |
NB_OUT_EXT_SDCCH_HO_EXEC_FAIL_REV |
Handover 16116n133q | |||
|
C88 |
NB_OUT_EXT_SDCCH_HO_EXEC_FAIL_NO_REV |
Handover 16116n133q | |||
|
C8a |
NB_PAGING_CMD |
Traffic Load | |||
|
C8b |
NB_IMM_ASS_CMD |
Traffic Load | |||
|
C8c |
NB_CHAN_REQD |
Traffic Load | |||
|
C8d |
NB_IMM_ASS_REJ |
Traffic Load | |||
|
C90 |
NB_OUT_EXT_SDCCH_HO_ATPT |
Handover 16116n133q | |||
|
C91 |
NB_INC_INT_SDCCH_HO_PREP_FAIL_CONG |
Handover 16116n133q | |||
|
C92 |
NB_INC_INT_SDCCH_HO_SUCC |
Handover 16116n133q | |||
|
C93 |
NB_INC_INT_SDCCH_HO_EXEC_FAIL_MS_ACCESS |
Handover 16116n133q | |||
|
C95a |
NB_OUT_INT_SDCCH_HO_REQ |
Handover 16116n133q | |||
|
C96 |
NB_OUT_INT_SDCCH_HO_SUCC |
Handover 16116n133q | |||
|
C97 |
NB_OUT_INT_SDCCH_HO_EXEC_FAIL_REV |
Handover 16116n133q | |||
|
C98 |
NB_OUT_INT_SDCCH_HO_EXEC_FAIL_NO_REV |
Handover 16116n133q | |||
|
CB601 |
NB_SMSCB_WRITE_REPL_SUCC |
Traffic Load | |||
|
CB602 |
NB_SMSCB_KILL_MESS_SUCC |
Traffic Load | |||
|
CB603 |
NB_SMS_CB_FAIL_IND |
Quality of Service | |||
|
CB604 |
NB_SMS_CB_WRITE_REP_KILL_MESS_REJ |
Quality of Service | |||
|
L1.1 |
NB_LAPD_INFO_FRAME_SENT |
Traffic Load | |||
|
L1.12 |
NB_LAPD_CRC_ERROR |
Quality of Service | |||
|
L1.15 |
NB_LAPD_INFO_FRAME_RESENT |
Quality of Service | |||
|
L1.16 |
TIME_LAPD_UNAVAIL |
Resource Availability & Usage | |||
|
L1.17 |
NB_LAPD_EST |
Quality of Service | |||
|
L1.2 |
NB_LAPD_INFO_FRAME_REC |
Traffic Load | |||
|
L1.5 |
NB_LAPD_RNR_SENT |
Quality of Service | |||
|
L1.6 |
NB_LAPD_RNR_REC |
Quality of Service | |||
|
MC01 |
NB_IMM_ASS_SUCC_MT |
Quality of Service | |||
|
MC02 |
NB_IMM_ASS_SUCC_MO |
Quality of Service | |||
|
MC02a |
NB_IMM_ASS_SUCC_MO_LOC_UPD |
Quality of Service | |||
|
MC02b |
NB_IMM_ASS_SUCC_MO_SMS |
Quality of Service | |||
|
MC02c |
NB_IMM_ASS_SUCC_MO_SUP_SERV |
Quality of Service | |||
|
MC02d |
NB_IMM_ASS_SUCC_MO_FOLLOW_ON |
Quality of Service | |||
|
MC02e |
NB_IMM_ASS_SUCC_MO_CM_REEST |
Quality of Service | |||
|
MC02f |
NB_IMM_ASS_SUCC_MO_L3INFO_UNKNOW |
Quality of Service | |||
|
MC02g |
NB_IMM_ASS_SUCC_MO_IMSI_DETACH |
Quality of Service | |||
|
MC02h |
NB_IMM_ASS_SUCC_MO_CALL_EST |
Quality of Service | |||
|
MC03 |
NB_OUT_SDCCH_HO_SUCC |
Quality of Service | |||
|
MC04 |
NB_IMM_ASS_PREP_FAIL_CONG |
Quality of Service | |||
|
MC07 |
NB_SDCCH_DROP_OUT_HO |
Quality of Service | |||
|
MC10 |
NB_INC_SDCCH_HO_SUCC |
Quality of Service | |||
|
MC101 |
NB_INTRA_SDCCH_HO_PREP_FAIL_CONG |
Handover 16116n133q | |||
|
MC1040 |
NB_HO_ATPT_23_TrafHandover 16116n133q |
Handover 16116n133q | |||
|
MC1044 |
NB_HO_ATPT_24_gencapture |
Handover 16116n133q | |||
|
MC1050 |
NB_HO_22_TooShortDistance |
Handover 16116n133q | |||
|
MC136 |
NB_TCH_DROP_EST_PHAS_RLF |
Quality of Service | |||
|
MC137 |
NB_SDCCH_DROP_EST_PHAS_BSS_PB |
Quality of Service | |||
|
MC138 |
NB_SDCCH_DROP_EST_PHAS_RLF |
Quality of Service | |||
|
MC139 |
NB_TCH_DROP_EST_PHAS_REM_TRANS_FAIL |
Quality of Service | |||
|
MC13a |
NB_TCH_NOR_ASS_QUEUED |
Traffic Load | |||
|
MC13b |
NB_INC_EXT_TCH_HO_QUEUED |
Traffic Load | |||
|
MC14 |
NB_TCH_NOR_ASS_HO_EST_PHAS_FAIL_BSS_PB |
Quality of Service | |||
|
MC141 |
AV_NB_TCH_QUEUED |
Resource Availability & Usage | |||
|
MC142e |
NB_OUT_IDR_SUCC |
Quality of Service | |||
|
MC142f |
NB_OUT_EDR_SUCC |
Quality of Service | |||
|
MC144e |
NB_OUT_IDR_REQ |
Traffic Load | |||
|
MC144f |
NB_OUT_EDR_REQ |
Traffic Load | |||
|
MC146b |
NB_TCH_NOR_ASS_EXEC_FAIL_RADIO |
Quality of Service | |||
|
MC147 |
NB_INC_SDCCH_HO_ALLOC |
Traffic Load | |||
|
MC148 |
NB_IMM_ASS_ALLOC |
Traffic Load | |||
|
MC149 |
NB_IMM_ASS_EXEC_FAIL_RADIO |
Quality of Service | |||
|
MC14a |
NB_TCH_DROP_HO_PREP_EXEC_FAIL_BSS_PB |
Quality of Service | |||
|
MC14b |
NB_TCH_NOR_ASS_PREP_EXEC_FAIL_BSS_PB |
Quality of Service | |||
|
MC14c |
NB_TCH_DROP_EST_PHAS_BSS_PB |
Quality of Service | |||
|
MC150a |
NB_MULTIBAND_MS_ACCESS_EXCEPT_LU |
Traffic Load | |||
|
MC151 |
NB_INC_IDR_SUCC (29) |
Handover 16116n133q | |||
|
MC153 |
NB_INC_IDR_REQ |
Handover 16116n133q | |||
|
MC155 |
NB_INC_IDR_PREP_FAIL_CONG |
Handover 16116n133q | |||
|
MC15a |
NB_INC_IDR_ALLOC |
Traffic Load | |||
|
MC15b |
NB_INC_TCH_HO_ALLOC |
Traffic Load | |||
|
MC16 |
NB_TCH_NOR_ASS_ALLOC |
Traffic Load | |||
|
MC161 |
NB_DTAP_NOR_ASS_SUCC |
Quality of Service | |||
|
MC162 |
NB_TCH_DROP_DTAP_EST_PHAS |
Quality of Service | |||
|
MC17a |
NB_INC_IDR_SUCC (1) |
Quality of Service | |||
|
MC17b |
NB_INC_TCH_HO_SUCC |
Quality of Service | |||
|
MC18 |
NB_TCH_NOR_ASS_SUCC |
Quality of Service | |||
|
MC19 |
NB_TCH_NOR_ASS_HO_PREP_FAIL_ACHAN_MIS (110) |
Quality of Service | |||
|
MC196 |
NB_SMS_PP_CON_SUCC |
Quality of Service | |||
|
MC197 |
NB_SMS_PP_CON_FAIL |
Quality of Service | |||
|
MC20 |
NB_OUT_TCH_HO_SUCC |
Quality of Service | |||
|
MC21 |
NB_TCH_DROP_OUT_HO_EXEC |
Quality of Service | |||
|
MC24 |
AV_NB_NOT_AVAIL_TRX_TS |
Resource Availability & Usage | |||
|
MC250 |
AV_NB_AVAIL_TCH |
Resource Availability & Usage | |||
|
MC26 |
AV_NB_AVAIL_SDCCH |
Resource Availability & Usage | |||
|
MC27 |
AV_NB_AVAIL_CCCH |
Resource Availability & Usage | |||
|
MC28 |
AV_NB_BUSY_TCH |
Resource Availability & Usage | |||
|
MC29 |
NB_MAX_SIMUL_BUSY_TCH |
Resource Availability & Usage | |||
|
MC31 |
NB_MAX_SIMUL_BUSY_SDCCH |
Resource Availability & Usage | |||
|
MC320a |
AV_NB_IDLE_TCH_INTERF_BAND1 |
Resource Availability & Usage | |||
|
MC320b |
AV_NB_IDLE_TCH_INTERF_BAND2 |
Resource Availability & Usage | |||
|
MC320c |
AV_NB_IDLE_TCH_INTERF_BAND3 |
Resource Availability & Usage | |||
|
MC320d |
AV_NB_IDLE_TCH_INTERF_BAND4 |
Resource Availability & Usage | |||
|
MC320e |
AV_NB_IDLE_TCH_INTERF_BAND5 |
Resource Availability & Usage | |||
|
MC34 |
TIME_ALL_AVAIL_TRX_TS_BUSY |
Resource Availability & Usage | |||
|
MC35 |
AV_NB_A_TRAF_CHAN_BLOCK_OUT_OF_SERV |
Resource Availability & Usage | |||
|
MC350 |
NB_N7_CON_REQ |
Traffic Load | |||
|
MC351 |
NB_N7_CON_CONF |
Traffic Load | |||
|
MC36 |
AV_NB_AVAIL_A_TRAF_CHAN |
Resource Availability & Usage | |||
|
MC370a |
NB_TRX_FR_ALLOC |
Resource Availability & Usage | |||
|
MC370b |
NB_TRX_HR_ALLOC |
Resource Availability & Usage | |||
|
MC380a |
TIME_TRX_FR_BUSY |
Traffic Load | |||
|
MC380b |
TIME_TRX_HR_BUSY |
Traffic Load | |||
|
MC381 |
TIME_TRX_TCH_BUSY_BY_MULTIBAND_MS |
Traffic Load | |||
|
MC390 |
NB_TIMES_SDCCH_BUSY (110) |
Resource Availability & Usage | |||
|
MC400 |
TIME_TRX_SDCCH_BUSY |
Traffic Load | |||
|
MC41 |
NB_INC_EXT_TCH_HO_PREP_FAIL |
Handover 16116n133q | |||
|
MC41a |
NB_INC_EXT_TCH_HO_PREP_FAIL_CONG |
Handover 16116n133q | |||
|
MC41b |
NB_INC_EXT_TCH_HO_PREP_FAIL_NO_TTCH |
Handover 16116n133q | |||
|
MC51 |
NB_INC_INT_TCH_HO_PREP_FAIL_CONG |
Handover 16116n133q | |||
|
MC586a |
NB_TCH_HO_ATPT_10_TooLowLevUpInZone |
Handover 16116n133q | |||
|
MC586b |
NB_TCH_HO_ATPT_11_TooLowLevDownInZone |
Handover 16116n133q | |||
|
MC586c |
NB_TCH_HO_ATPT_13_TooHighLevUpDownOutZone |
Handover 16116n133q | |||
|
MC607 |
NB_SDCCH_HO_20_HighLevNeigCellForcDR |
Handover 16116n133q | |||
|
MC61 |
NB_INTRA_TCH_HO_PREP_FAIL_CONG |
Handover 16116n133q | |||
|
MC612 |
NB_TCH_NOR_ASS_PREP_FAIL_CONG |
Quality of Service | |||
|
MC612a |
NB_TCH_NOR_ASS_PREP_FAIL_NO_QUEUE |
Quality of Service | |||
|
MC612b |
NB_TCH_NOR_ASS_PREP_FAIL_QUEUE_FULL |
Quality of Service | |||
|
MC612c |
NB_TCH_NOR_ASS_PREP_FAIL_T11_EXP |
Quality of Service | |||
|
MC612d |
NB_TCH_NOR_ASS_PREP_FAIL_QUEUE_REJ |
Quality of Service | |||
|
MC642 |
NB_INC_EXT_HO_SUCC |
Handover 16116n133q | |||
|
MC643 |
NB_INC_EXT_HO_EXEC_FAIL_MS_ACCESS |
Handover 16116n133q | |||
|
MC645 |
NB_OUT_EXT_HO_REQ |
Handover 16116n133q | |||
|
MC646 |
NB_OUT_EXT_HO_SUCC |
Handover 16116n133q | |||
|
MC647 |
NB_OUT_EXT_HO_EXEC_FAIL_REV |
Handover 16116n133q | |||
|
MC648 |
NB_OUT_EXT_HO_EXEC_FAIL_NO_REV |
Handover 16116n133q | |||
|
MC650 |
NB_OUT_EXT_HO_ATPT |
Handover 16116n133q | |||
|
MC652 |
NB_INC_INT_HO_SUCC |
Handover 16116n133q | |||
|
MC653 |
NB_INC_INT_HO_EXEC_FAIL_MS_ACCESS |
Handover 16116n133q | |||
|
MC655a |
NB_OUT_INT_HO_REQ |
Handover 16116n133q | |||
|
MC656 |
NB_OUT_INT_HO_SUCC |
Handover 16116n133q | |||
|
MC657 |
NB_OUT_INT_HO_EXEC_FAIL_REV |
Handover 16116n133q | |||
|
MC658 |
NB_OUT_INT_HO_EXEC_FAIL_NO_REV |
Handover 16116n133q | |||
|
MC660 |
NB_OUT_INT_HO_ATPT |
Handover 16116n133q | |||
|
MC662 |
NB_INTRA_HO_SUCC |
Handover 16116n133q | |||
|
MC663 |
NB_INTRA_HO_EXEC_FAIL_NO_REV |
Handover 16116n133q | |||
|
MC667 |
NB_INTRA_HO_EXEC_FAIL_REV |
Handover 16116n133q | |||
|
MC670 |
NB_HO_2_TooLowQualUp |
Handover 16116n133q | |||
|
MC671 |
NB_HO_3_TooLowLevUp |
Handover 16116n133q | |||
|
MC672 |
NB_HO_4_TooLowQualDown |
Handover 16116n133q | |||
|
MC673 |
NB_HO_5_TooLowLevDown |
Handover 16116n133q | |||
|
MC674 |
NB_HO_6_TooLongDistance |
Handover 16116n133q | |||
|
MC675 |
NB_HO_MSC_TRIG |
Handover 16116n133q | |||
|
MC676 |
NB_HO_15_TooHighLevInterfUp |
Handover 16116n133q | |||
|
MC677 |
NB_HO_16_TooHighLevInterfDown |
Handover 16116n133q | |||
|
MC678 |
NB_HO_12_TooLowPowBudg |
Handover 16116n133q | |||
|
MC679 |
NB_HO_21_HighLevNeigCellPrefBand |
Handover 16116n133q | |||
|
MC785a |
NB_HO_7_ConsBadSACCHmicroCell |
Handover 16116n133q | |||
|
MC785d |
NB_HO_17_TooLowLevUpMicroCell |
Handover 16116n133q | |||
|
MC785e |
NB_HO_18_TooLowLevDownMicroCell |
Handover 16116n133q | |||
|
MC785f |
NB_HO_14_HighLevNeigLowCellSlowMS |
Handover 16116n133q | |||
|
MC80 |
TIME_ALL_AVAIL_SDCCH_BUSY |
Resource Availability & Usage | |||
|
MC81 |
NB_INC_EXT_SDCCH_HO_PREP_FAIL_CONG |
Handover 16116n133q | |||
|
MC820 |
NB_INC_EXT_HO_REQ |
Handover 16116n133q | |||
|
MC821 |
NB_INC_EXT_HO_ATPT |
Handover 16116n133q | |||
|
MC830 |
NB_INC_INT_HO_REQ |
Handover 16116n133q | |||
|
MC831 |
NB_INC_INT_HO_ATPT |
Handover 16116n133q | |||
|
MC870 |
NB_INTRA_HO_REQ |
Handover 16116n133q | |||
|
MC871 |
NB_INTRA_HO_ATPT |
Handover 16116n133q | |||
|
MC8a |
NB_CELL_PAGING_CMD |
Traffic Load | |||
|
MC8b |
NB_CELL_IMM_ASS_CMD |
Traffic Load | |||
|
MC8c |
NB_CELL_CHAN_REQD |
Traffic Load | |||
|
MC8d |
NB_CELL_IMM_ASS_REJ |
Traffic Load | |||
|
MC91 |
NB_INC_INT_SDCCH_HO_PREP_FAIL_CONG |
Handover 16116n133q | |||
|
MN1.1 |
TIME_N7_ALIGNED |
Resource Availability & Usage | |||
|
MN2.1 |
TIME_N7_NOT_ALIGNED |
Resource Availability & Usage | |||
|
N1.1 |
TIME_N7_ALIGNED |
Resource Availability & Usage | |||
|
N1.10 |
NB_N7_CHANGEOVER |
Quality of Service | |||
|
N1.11 |
NB_N7_CHANGEBACK |
Quality of Service | |||
|
N1.12 |
NB_N7_RESTORATION |
Quality of Service | |||
|
N1.2 |
NB_N7_LINK_FAIL_ANY_CAUSE |
Quality of Service | |||
|
N1.3 |
NB_N7_LINK_FAIL_FIB_BSN |
Quality of Service | |||
|
N1.4 |
NB_N7_LINK_FAIL_T7_EXP |
Quality of Service | |||
|
N1.5 |
NB_N7_LINK_FAIL_SU_ERROR_RATE |
Quality of Service | |||
|
N1.6 |
NB_N7_LINK_FAIL_CONG |
Quality of Service | |||
|
N1.7 |
NB_N7_LINK_FAIL_ALIGNMENT |
Quality of Service | |||
|
N1.8 |
NB_N7_SU_REC_WITH_ERROR |
Quality of Service | |||
|
N1.9 |
NB_N7_NEG_ACK_REC |
Quality of Service | |||
|
N2.1 |
TIME_N7_NOT_ALIGNED |
Resource Availability & Usage | |||
|
N2.7 |
TIME_N7_UNAVAIL_ERROR_SL |
Resource Availability & Usage | |||
|
N2.9 |
TIME_N7_UNAVAIL_MSC_PROC_OUTAGE |
Resource Availability & Usage | |||
|
N3.1 |
NB_N7_SIF_SIO_SENT |
Traffic Load | |||
|
N3.10 |
NB_N7_MSU_DISC_DUE_CONG |
Quality of Service | |||
|
N3.11 |
NB_N7_CONG_WITH_MSU_LOST |
Quality of Service | |||
|
N3.2 |
NB_N7_OCTETS_RESENT |
Traffic Load | |||
|
N3.3 |
NB_N7_MSU_SENT |
Traffic Load | |||
|
N3.4 |
NB_N7_SIF_SIO_REC |
Traffic Load | |||
|
N3.5 |
NB_N7_MSU_REC |
Traffic Load | |||
|
N3.7 |
TIME_N7_UNAVAIL_CONG |
Resource Availability & Usage | |||
|
N4.2 |
TIME_N7_UNAVAIL_LINK_SET |
Resource Availability & Usage | |||
|
X3.20 |
NB_X25_INC_CALL_SUCC_CLOSED |
Traffic Load | |||
|
X3.21 |
NB_X25_OUT_CALL_SUCC_CLOSED |
Traffic Load | |||
|
X3.22 |
NB_X25_INC_CALL_ABNORM_CLOSED |
Quality of Service | |||
|
X3.23 |
NB_X25_OUT_CALL_ABNORM_CLOSED |
Quality of Service |
END OF DOCUMENT
|
